Need help?Do you have a question about the Duosida SES-32-3 and is the answer not in the manual?
The installation surface must measure at least 262 x 222 mm (height x width).
The mounting substrate must be level and firm.
Minimum distances to other technical installations must be observed.
The installation height should be between 140 and 160 cm (floor to bottom edge of housing).
The installation site must be freely accessible.
The charging cable must not be under strain during the charging process.
The charging cable and connector must not be driven over.
The charging cable must not be kinked or twisted.
The charging cable must be coiled tightly and stored.
Installation and repairs must only be carried out by a specialist electrical contractor.
No modifications must be made to the charging station.
None of the components need to be maintained by the user.
The charging station must only be cleaned using a dry cloth.
Maintenance must be checked regularly.
The cable must be checked regularly for damage or aging.
Details on manufacturer, model, voltage, current, phases, IP code, and operating temperature.
Technical drawings showing the physical measurements of the charging station.
Diagram illustrating the mounting points and dimensions for installation.
Information and images of the mounting plate used for installation.
Components required for fixing the charging station, including expansion bolts and hooks.
Overview of the main housing of the charging station and its display.
Details on the available charging gun models and their specifications.
Description of different product styles, including wall-mounted and stake-mounted versions.
List of tools required for the installation process, including drills, wrenches, and screwdrivers.
Detailed step-by-step guide for installing the charging station.
General| Brand | Duosida |
|---|---|
| Model | SES-32-3 |
| Category | Battery Charger |
| Language | English |
To Next Page
