EasyManua.ls Logo

DUOTTS F26 - Safety and Riding Guidelines; Operating Safety Procedures; Pre-Ride Safety Inspection

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING SAFETY
Before riding the bike for the first time, ensure that you have read and understood this manual. Make
sure you understand how to turn on and activate the pedal assist and throttle. When first riding the
bike, take care to start slowly with a low level of pedal assist, Take your first ride in a safe area away
from cars, other bikers, pedestrians, or other potentially dangerous obstacles. Only move up pedal
assist levels when you feel comfortable and you have ample experience riding the bike. The higher
pedal assist levels will accelerate you to higher speeds more quickly. Take care when riding the bike
at any speed. Failure to adhere to warnings and guidelines in this manual can lead to serious harm,
injury, or death. Damage sustained by the bike from failing to follow instructions, guidelines, and
warnings in this manual is not covered under warranty. Do not lean on the bike when it is parked and
the kickstand is in use.
HELMETS AND LOCAL LAWS
Always wear a helmet when riding your e-Bike. Ensure that the helmet fits your head and is securely
tightened down. Before riding, read local law and comply with all rules relating to cycling and biking
in your area. If you attach a seat for children to the bike, they must also be wearing properly fitted
helmets at all times.
PRE-RIDE SAFETY CHECK AND INSPECTION
Before each ride, make sure to inspect your e-Bike to ensure there are no loose fasteners or
accessories. Make sure to specifically check that both the front and rear axles are secure. Also,
make sure both the handlebars and the handlebar stem are not loose. Check the tire pressure of
both wheels before riding to ensure the tires are inflated to the recommended pressure printed
on the side of the tire walls. Pull the brake levers to make sure your brakes are working properly
and adjust if necessary. Ensure both your seat post and handlebar stem are inserted past their
minimum insertion points as indicated by the markings on them.
RIDING IN WET CONDITIONS
This electric bicycle can withstand light rain and small splashes but is not designed to be subjected to
inclement weather, extremely heavy showers, or submersion in water.
Note: Use caution when riding in wet conditions as it will take longer to use the brakes to slow
down, and also when turning as the tires may slip. The electrical components on the bike are not
waterproof. The entire bike has an IP rating of 65. Water damage is not covered under warranty.
14

Related product manuals