To Next Page
B
bauersamuelAug 5, 2025
What to do if my DÜPERTHAL Laboratory Equipment does not run?
- WwcallahanAug 5, 2025
If your DÜPERTHAL Laboratory Equipment does not run, here are some things to check: * Ensure the appliance is switched on at the On/Off switch. * Verify the power supply cord is correctly connected to the intended socket. * If the above steps don't work, the supply cord may need replacing, or the fuses might be blown. Replace the fuses (2 x 0.8 A slow blow). For overvoltage issues, disconnect the device and check/replace the fuses (2 x 5 A slow blow).
General
