Dupont Corian User Manual

Corian Care and Maintenance
Dupont Corian was created for a lifetime of easy care. Just follow the simple guidelines
listed here to help you keep your Corian surfaces looking fresh.
Experience has shown that a film builds up on the surface if water is left to dry on the
countertop. This film will dull the look of the countertop making the finish appear
blotchy and uneven. To prevent build up of the film, it is very important to wipe the
countertop completely dry after spills and cleaning.
Cleaning All Finishes
Most dirt & residue Use soapy water, ammonia based cleaner (not
window cleaner), rinse and wipe completely dry.
Commercially available solid surface cleaners,
such as Clean EnCounters® will also work well.
Preventing hard water marks Rinse and wipe completely dry after cleaning;
clean up spills before they dry.
Removing hard water marks Use a cleaner formulated for removing hard water
marks such as CLR or Lime-A-Way.
Difficult residue Spray residue with Deep Cleaner for DuPont
Corian® from Stone Care International. Follow
instructions on the bottle. Wash area with soapy
water, rinse and wipe completely dry. If residue
persists, follow steps below for removing dulling
film.

Dupont Corian Specifications

General

Brand	Dupont
Model	Corian
Category	Kitchen Appliances
Language	English

Summary

Corian Care and Maintenance

Cleaning All Finishes

Use soapy water, ammonia based cleaner, rinse and wipe dry. Solid surface cleaners also work well.

Preventing Hard Water Marks

Rinse and wipe completely dry after cleaning; clean up spills before they dry.

Removing Hard Water Marks

Use a cleaner formulated for removing hard water marks such as CLR or Lime-A-Way.

Difficult Residue Cleaning

Use Deep Cleaner for DuPont Corian® from Stone Care International. Follow instructions, wash, rinse, and dry.

Disinfecting Surfaces

Disinfecting Procedure

Wipe surface with diluted household bleach (1 part water/1 part bleach). Rinse thoroughly with water and wipe completely dry.

Preventing Damage

Preventing Heat Damage

Minimize direct heat exposure. Do not place hot pots, pans directly on the surface. Use trivets or hot pads.

Preventing Other Damage

Avoid strong chemicals like paint removers. Flush spills immediately. Do not cut directly on countertops.