EXTENSION TUBES (17)
Connect the steam hose (10) to the extension tubes (17), until the accessory lock (14) snaps in. All the accessories are connected the same way.
RECTANGULAR TOOL (19)
The rectangular tool (19) is used to clean walls, floors and carpets. Use it with the microfiber cloth (32) to glide smoothly over the surface
by attaching it to the cloth holding clips (20). Change the cloth when saturated with dirt. Use the rectangular tool directly when you need
additional scrubbing action, for example when cleaning ceramic or porous tiles.
STEAMMOP™ (35)
The SteamMop™ is also used to clean floors, walls and ceilings. Its rotating head allows for easier access under low furniture.
Use it with the microfiber pad (33).
MICROFIBER PAD (33)
The microfiber pad (33) is used to glide smoothly over floors and carpets. To use this accessory, you can attach it to the SteamMop™
or place the rectangular tool directly over it. Wrap the extremities of the cloth around the tool and under the cloth holding clips (20).
IMPORTANT:
Always respect the surface that you are cleaning, adhere to the surface cleaning instructions and do a colour
test on a hidden section before you begin cleaning.
WINDOW TOOL (22)
The window tool (22) makes the cleaning and degreasing of windows easy. Attach the window tool to the extensions (17) or directly on
the steam hose (30). Use the foam side to steam and scrub and vacuum the window and flip the tool to wipe o dirt and condensation
using the squeegee side. Wipe corners with a cloth.
To Next Page
Loading...
