MAX
MIN
5
EN
BEFORE FIRST USE
• Remove any stickers or protective covers from the steam head.
• Unwind and straighten the cord before use.
FILL THE WATER TANK
Press the water tank release buttons
5
, pull out the water tank
6
.
Open the water inlet cover and fill the water tank with tap water until it reaches the MAX line.
Warning: To avoid an electrical circuit overload, it is recommended that no other
high wattage appliances are plugged into the same circuit as your clothes steamer
when it is in use.
When operating the garment steamer for the first time, allow it to steam for
a few minutes. This will remove any impurities and odors that might have been le
by the manufacturing process.
Always ensure the water tank is at least a third full or above minimum level.
Do not exceed the MAXIMUM level when filling the water tank.
TIP:
To Next Page