Dura Trel Kingston User Manual

Kingston pergola
Assembly & installation Instructions
General Information:
» Read through carefully before beginning assembly.
» When assembling components, place on a clean, flat,
non-abrasive surface to avoid scratches.
» In the event of missing or defective parts, please call our
customer service department directly at 1-877-258-6020
Tools required:
» Cordless Drill with #2 phillips bit
» Hammer
» Tape Measure
» Shovel
» Post Hole Digger (recommended)
» Ladder/Step stool (recommended)
Part # Description (Box Number) Qty
1 4” sq. x 93” Post (1) 4
2 1½” x 5½“ x 106” Lower Support (2) 2
3 1½” x 5½“ x 106” Upper Support (2) 5
4 ⅞” x 1½” x 106” Top Rail (2) 7
5 1½” Upper Support Bracket (3) 6
6 4” sq. New England Post Cap (3) 4
7 6⅛” Support Rail End Cap (3) 14
8 30” U-channel Ground Anchor (1) 4
9 Hardware Kit (includes): (3)
PVC Glue Can 1
⅞” x 1½” Top Rail Cap 14
2” Kappet Screw 48
1¼” Kappet Screw 35
¾” Kappet Screw 24
Kappet Screw Caps 107
1” Self-tapping White-head Screws 8
Parts List:
FIGURE 1
Product dimensions &
Part identification

Dura Trel Kingston Specifications

General

Brand	Dura Trel
Model	Kingston
Category	Lawn and Garden Equipment
Language	English

Summary

General Information

Customer Support Contact

Contact information for missing or defective parts.

Tools Required

Assembly Process

Step 1: Lower Support Assembly

Attaching upper support brackets to the lower support using screws.

Step 2: Post and Lower Support Connection

Inserting lower support ends into post routed holes without screwing.

Step 3: Upper Support Installation

Inserting upper support ends through top routed holes of posts.

Step 4: Top Rail Attachment

Laying top rails onto upper supports and fastening with screws.

Step 5: Securing Main Structure

Screwing together all posts and supports.

Step 6: Adding Remaining Upper Supports

Sliding remaining upper supports through brackets underneath top rails.

Step 7: Securing Top Rails

Fastening top rails to upper supports with screws.

Step 8: Securing Additional Top Rails

Fastening remaining top rails to upper supports.

Step 9: Attaching Caps

Gluing post caps, support end caps, and top rail caps.

Pergola Installation

Installation Option 1

Inserting ground anchors into posts and fastening.

Installation Option 2

Pounding ground anchors into the ground, then sliding pergola over them.

Installation Option 3

Placing ground anchors in wet cement for a permanent installation.