EasyManua.ls Logo

DURABLE TOUGH - Safety Instructions

DURABLE TOUGH
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inch = mm x 0,0254 # 8944 | 07.24 | 32 | 07.24 | # 8944 Inch = mm x 0,0254
DE EN
Zu Ihrer Sicherheit
Beachten und befolgen Sie die gesamten Nut
-
zungsinformationen während der Produktnutzung.
Nutzungsinformationen für eine spätere Verfüg
-
barkeit aufbewahren.
Bestimmungsgemäße Verwendung
Der TABLET HOLDER ist eine Halterung für Tablet
PCs mit einer Dicke von max. 8 mm. Er ist zur
Nutzung in trockenen Innenräumen bestimmt. Der
TABLET HOLDER ist für die Montage an massiven
Wänden oder auf massiven Holztischplatten mit
min. 25 mm Materialstärke konzipiert. Jede ande
-
re Verwendung gilt als nicht bestimmungsgemäß
und führt zum Haftungsausschluss.
Definition der Symbole
Diese Kombination aus Symbol und Signalwort
weist auf eine gefährliche Situation hin, die zu
leichten oder schweren Verletzungen führen kann,
wenn sie nicht vermieden wird.
Dieses Signalwort weist auf Informationen hin, die
nicht sicherheitsrelevant sind, wie zum Beispiel
auf Material- und Umweltschäden.
Dieses Symbol weist auf nützliche Tipps und
Empfehlungen sowie Informationen für einen
effizienten und reibungslosen Betrieb hin.
Grundlegende Sicherheitshinweise
Befolgen Sie immer die gültigen nationalen und
internationalen Sicherheits-, Gesundheits- und
Arbeitsvorschriften.
Prüfen Sie vor dem Bohren, ob sich in der Wand
Strom- oder Wasserleitungen befinden.
Das beiliegende Befestigungsmaterial ist für
massive Stein- oder Betonwände ausgelegt.
Bei abweichenden Wandmaterialien wählen Sie
geeignetes Befestigungsmaterial.
Das beiliegende Befestigungsmaterial ist für
massive Holztische mit einer Plattenstärke von
min. 25 mm ausgelegt. Bei abweichender
Plattenstärke oder Material wählen Sie
geeignetes Befestigungsmaterial.
Verwendung
Gefahr vor Sachschäden durch fehlerhafte
Nutzung.
Herunterfallen und Beschädigung des Tablets
bei fehlerhafter Positionierung.
Stellen Sie sicher, dass das Tablet nicht dicker
als 8 mm ist und auf beiden Seiten in der
Halterung sitzt. Nutzen Sie die optionale
Diebstahlsicherung, um ein ungewolltes Öffnen
der Halterung zu vermeiden.
Verlegen Sie Kabel immer spannungsfrei in den
vorgesehenen Kabelführungen.
Vor jeder Benutzung den TABLET HOLDER auf
einwandfreien Zustand kontrollieren. Defekte
Teile ersetzen.
Bewegliche Teile des TABLET HOLDER nicht
gegen den Widerstand im Drehgelenk drehen.
Vor einer Umpositionierung des TABLET HOLDER
zuerst das Tablet aus der Halterung nehmen.
Stellen Sie sicher, dass Kinder nicht mit dem
Produkt spielen.
Reinigung
Gefahr vor Sachschäden durch Feuchtigkeit.
Wasser oder Reiniger kann bei Kontakt mit dem
Tablet oder dem Kabel zum Kurzschluss führen.
Trennen Sie vor der Reinigung das Tablet von
der Netzspannung.
Reinigen Sie das Produkt mit einem feuchten
Tuch, ohne das Tablet dabei mit Feuchtigkeit in
Kontakt zu bringen.
Gefahr vor Materialschäden.
Aggressive Reiniger oder scharfe Gegenstände
können die Oberflächen verletzen.
Verwenden Sie keine scharfen Gegenstände,
scheuernde oder aggressive Reinigungsmittel
und keine Lösungsmittel.
Reinigen Sie das Produkt mit einem weichen Tuch.
Entsorgung
Gefahr für die Umwelt durch unsachgemäße
Entsorgung.
Trennen Sie die verbauten Materialen nach der
Demontage.
Entsorgen Sie das Produkt entsprechend der
lokalen Entsorgungsvorschriften.
Sicherheitshinweise Safety instructions
For your safety
Observe and follow all usage information when
using the product. Store the usage information for
later availability if required.
Intended use
The TABLET HOLDER is a holder for tablet PCs
with a maximum thickness of 8 mm. It is intended
for use in dry indoor areas. The TABLET HOLDER
is designed for mounting to solid walls or on
solid wooden table tops with a minimum material
thickness of 25 mm. Any other use is considered
improper and will result in exclusion of liability.
Definition of symbols
This combination of symbol and signal word indi
-
cates a hazardous situation which, if not avoided,
may result in minor or serious injuries.
This signal word indicates information that is not
relevant to safety, such as material and environ
-
mental damage.
This symbol indicates useful tips and recommen
-
dations as well as information for efficient and
smooth operation.
Fundamental safety instructions
∙ Always follow the applicable national and
international safety, health and work
regulations.
Before drilling, check whether there are power
lines or water pipes in the wall.
The enclosed fixing material is designed for
solid stone or concrete walls. For different wall
materials, select suitable fixing material.
The enclosed fixing material is designed for solid
wooden tables with a tabletop thickness of at
least 25 mm. For different tabletop thickness or
material, select suitable fixing material.
Use
Risk of material damage due to incorrect use.
If incorrectly positioned, the tablet can drop and
be damaged.
Make sure that the tablet is no thicker than
8 mm and is fastened in the holder on both sides.
Use the optional anti-theft device to prevent the
holder from being opened unauthorizedly.
Always lay the cables in the designated cable
guides without tension.
Before each use, check that the TABLET
HOLDER is in perfect condition.
Replace defective parts.
Do not turn moving parts of the TABLET HOLDER
against the resistance in the swivel joint.
When repositioning the TABLET HOLDER,
remove the tablet from the holder beforehand.
Make sure that children do not play with the
product.
Cleaning
Risk of material damage due to moisture.
Water or cleaning agents, upon contact with the
tablet or cable, may cause a short circuit.
Before cleaning, disconnect the tablet from the
mains voltage.
Clean the product with a damp cloth without
bringing the tablet into contact with moisture.
Danger of material damage.
Aggressive cleaning agents or sharp objects
can damage the surfaces.
Do not use any sharp objects, abrasive or
aggressive cleaning agents or solvents.
Clean the product with a soft cloth.
Disposal
Danger to the environment due to improper
disposal.
Separate the installed materials after
disassembly.
Dispose of the product in accordance with local
disposal regulations.

Related product manuals