Durablow TR1004 - User Manual

Version 20190806 Page
1
INSTALLATION & OPERATING INSTRUCTIONS
(Transmitter Model: TR1003, TR1004 + Receiver Model: RR01)
IF YOU CAN NOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS, DO NOT ATTEMPT TO INSTALL OR OPERATE.
INTRODUCTION
This Durablow remote control system is to provide a safe and reliable control for gas heating appliances, such as fire
fireplace. The system can be operated thermostatically or manually from the transmitter (remote handset). The system
operates on radio frequencies (RF) within a 20-foot range and non-directional signals. The remote receiver box code
must be matched to the transmitter prior to initial use (see LEARNING TRANSMITTER TO RECEIVER).
Read ALL sections and original manufacturer manual for safety installation before any action. These safety features shut
down the system and appliance, such as fireplace when a potentially unsafe condition exists, such as high-heat.
Contents:
Page
1
PACKING LIST
........................................................
2
2
LCD DISPLAY ICONS
........................................................
2
3
BASIC TRANSMITTER FUNCTIONS & MODES
........................................................
2
4
SETTING UP THE TRANSMITTER
........................................................
3
5
SETTING THE CLOCK
........................................................
3
6
CONVERTING ºF / ºC SCALE
........................................................
3
7
REMOTE RECEIVER BOX
........................................................
4
8
WARNING & REMINDER
........................................................
4
9
PRE-INSTALLATION
........................................................
5
10
WALL MOUNTING
........................................................
5
11
HEARTH MOUNT
........................................................
5
12
WIRING INSTRUCTIONS
........................................................
6
13
LEARNING TRANSMITTER TO RECEIVER
........................................................
7
14
SYSTEM TESTS & CHECK LIST
........................................................
7
15
ADDITIONAL INFORMATION
........................................................
8
16
TROUBLE SHOOTING
........................................................
11
17
WARRANTY & LEGAL DISCLAIMER
........................................................
11
18
FCC / ID
........................................................
12

Summary

Introduction and System Overview

Introduction to Durablow Remote System

Overview of the Durablow remote control system for gas heating appliances and its basic functionality.

Packing List and Component Check

Verify all included parts are present and in good condition before installation.

Understanding LCD Display Icons

Explanation of the icons displayed on the transmitter's LCD screen for various functions.

Basic Transmitter Functions and Modes

Details on how to operate the transmitter, including manual ON/OFF and thermostat modes.

Transmitter Setup and Configuration

Setting the Transmitter Clock

Guide for setting the current time on the transmitter handset.

Converting Temperature Scale (°F;°C)

Instructions for switching the temperature display between Fahrenheit and Celsius.

Receiver Box Operation and Installation

Remote Receiver Box Modes

Explanation of the ON, REMOTE, and OFF modes for the receiver box slide switch.

Important Warnings and Reminders

Critical safety precautions and installation guidelines to follow for system operation.

Pre-Installation and Mounting Options

Guidance on deciding placement and mounting methods for the receiver box.

Wall and Hearth Mounting

Step-by-step instructions for installing the receiver box on a wall or near a hearth.

Wiring and System Testing

Wiring Instructions for Millivolt Valves

How to connect the receiver box to millivolt gas valves.

Wiring for Electronic Ignition Modules

How to connect the receiver box to electronic spark ignition systems.

Learning Transmitter to Receiver

Procedure for pairing the transmitter with the receiver box.

System Tests and Check List

Verification steps for millivolt and electronic ignition systems.

Advanced Operation and Features

Thermo Safety Protection

Understanding the receiver's thermistor safety feature and its alerts.

Transmitter Operating Distance

Information on the recommended operating range for the transmitter.

Setting Desired Room Temperature

How to set the target temperature for thermostat mode.

Temperature Differential (Swing) Settings

Adjusting the temperature variation for thermostat cycling.

Setting the Countdown Timer

Programming the automatic shut-off timer for the system.

Childproof Feature and Setting

Activating and deactivating the child lock feature on the transmitter.

Troubleshooting and Warranty

Troubleshooting Common Problems

Solutions for issues encountered with the remote control system and fireplace.

Warranty and Legal Disclaimer

Information regarding the product warranty and legal notices.

Regulatory Compliance

FCC Statement and Compliance

Details on FCC rules compliance for the device.

Industry Canada FCC ID Statement

Details on Industry Canada RSS standards compliance for the device.

Durablow TR1004 Specifications

General

Brand	Durablow
Model	TR1004
Category	Control Systems
Language	English