To Next PageTo Next PageWhat to do if my Duracraft Dehumidifier won't work?
If your Duracraft Dehumidifier won't work, first ensure it's properly connected to the power socket. Then, check the fuse box, or consult an expert. If the water tank control lamp is illuminated, empty the water tank. Also, verify that the water tank is correctly installed. Finally, if the automatic defrosting function is active, the unit will resume normal operation after defrosting.
Why is my Duracraft DD-TEC10E not collecting water?
If your Duracraft Dehumidifier produces little or no condensation water, start by checking the air intake and outflow vents to ensure they are free from blockage. Also, clean the air filter as described under „Weekly cleaning“.
General| Dehumidifying Capacity | 10 liters/day |
|---|---|
| Water Tank Capacity | 2 liters |
| Refrigerant | R134a |
| Tank Capacity | 2 liters |
| Color | White |
| Capacity | 10 liters/day |
| Coverage Area | 20 square meters |
| Noise Level | 45 dB |
Details on emptying the water tank when it is full. Control lamp indicates status.
Instructions for setting up continuous water drainage using a tube.
Steps for daily cleaning of the dehumidifier and water tank.
Procedure for weekly cleaning including air filter and tank.
Guidance on disinfecting the water tank every two weeks.
Instructions for long-term storage and maintenance of the unit.
