IMPORTANT
SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances,
basic precautions should always be
followed to reduce the risk of fire,
electric shock, and injury to
persons, including the following:
1. Use this fan only as described in
this manual. Other use not
recommended may cause fire,
electric shock or injury to persons.
2. This product is intended for
household use
ONLY and not for
commercial, industrial or outdoor
use.
3. To protect against electric shock, do
not place fan in window, immerse
unit, plug or cord in water or spray
with liquids.
4. This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of shock, this
plug is intended to fit only one way
in a polarized outlet. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician.
DO NOT
attempt to defeat this safety feature.
5. Close supervision is necessary when
any appliance is used by or near
children.
6. Turn the fan to the OFF position and
unplug the fan from the outlet when
not in use, when moving the fan from
one location to another and before
cleaning.
7. To disconnect the fan, first turn
control to the
OFF position, grip the
plug and pull it from the wall outlet.
Never pull by the cord.
8. Do not operate the fan in the
presence of explosive and/or
flammable fumes.
9. Do not place the fan or any parts
near an open flame, cooking or
other heating appliance.
10. Do not operate the fan with a
damaged cord or plug or if the
product malfunctions, is dropped or
damaged in any manner (see
warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer
may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall
or ceiling.
15. Do not operate if the fan housing is
removed or damaged.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the
plug. Contact a qualified electrician
to replace loose or worn outlet.
W
ARNING: To Reduce The Risk of
Fire or Electric Shock, Do Not Use
This Fan With Any Solid-State
Speed Control Device.
12” OSCILLATING
TABLE FAN
DFT-218W
Owner’s Manual
To Next Page
Need help?
General
