To Next PageTo Next Page
Need help?Do you have a question about the DURAG D-LX 100 and is the answer not in the manual?
Lists error codes, sources, and possible causes indicated by the yellow LED for troubleshooting.
Instructions for initial operation of the flame scanner after proper mounting and connection.
How to adjust the threshold to determine flame ON/OFF signals based on flame signal intensity.
Table and graph detailing thresholds for different rocker switch positions.
Adjusting signal amplification of the photo element for intense flame signals.
Procedures for programming explosion-proof models in hazardous environments.
Using the digital display unit for optimal alignment and setting of flame recognition thresholds.
Describes UV scanner types, spectral sensitivity, and suitability for gas/oil flames.
Explains IR scanner types, spectral sensitivity, and applications for oil/wood/coal flames.
Criteria for selecting the appropriate flame scanner model based on fuel type and characteristics.
Lists different D-LX 100 models with various axial plug connections and flameproof housings.
Details available options such as current output and safety time settings.
Provides optical angle of view and spectral sensitivity data for various scanner models.
Details power supply, fuse protection, current output, and relay contact specifications.
Shows physical dimensions, connections, and viewing angles of the D-LX 100.
Illustrates the electrical connections for the standard D-LX 100 models.
Provides dimensional drawings and technical data for explosion-proof housings.
Shows wiring diagrams for D-LX 100 models with explosion-proof housings.
Details dimensional drawing and specifications for Class I, Div. 2 hazardous area use.
Provides dimensional drawing and specifications for Zone 2 hazardous area use.
Guidelines on proper cabling, shielding, and error suppression for the D-LX 100.
Step-by-step guide for replacing the shutter and UV-photocell assembly.
Describes the digital display unit for orientation, measurements, and threshold calculation.
Technical specifications for the AC-DC power supply unit for the flame scanners.
Dimensional drawing and material details for a ball joint flange accessory.
Dimensional drawing and material details for another ball joint flange accessory.
Description and dimensions of a weather protection hood for outdoor installations.
Certificate details from DIN-CERTCO confirming conformity with EN 230.
EC type examination certificate for gas appliance directive compliance.
Certificate details regarding compliance with the Pressure Equipment Directive.
UL recognition for controls and primary safety components.
Canadian UL recognition for controls and primary safety components.
FM approval details for various DURAG flame monitor systems and sensors.
EC type-examination certificate for equipment used in potentially explosive atmospheres.
Declaration confirming product compliance with various Council Directives and standards.
General