DURAG D-LX 100 All-In-One User Manual


English 08/2004English 08/2004
DURAGDURAG
GmbHGmbH
Kollaustraße 105 · D-22453 Hamburg · Tel. Kollaustraße 105 · D-22453 Hamburg · Tel. +49 40 55 42 18-0 · Fax +49 40 58 41 54+49 40 55 42 18-0 · Fax +49 40 58 41 54
Internet: www.durag.deInternet: www.durag.de
··
Email: info@durag.deEmail: info@durag.de
D-LX 100D-LX 100
All-In-OneAll-In-One
Flame ScannerFlame Scanner
EuropeanEuropean
StandardStandard
EN 230: 1991EN 230: 1991
Gas applianceGas appliance
directivedirective
90/396/EWG90/396/EWG
Pressure equipmentPressure equipment
directivedirective
97/23/EG97/23/EG
Fuel Fuel Oil Oil Gas Gas Oil Oil + + GasGas
Register Number:Register Number: 5F161/03 5F161/03 CE-0085AT039CE-0085AT0397 7 BAF BAF MUC MUC 03 03 04 04 072357 072357 003003
Tested by Tested by TÜV SüddeutschlandTÜV Süddeutschland
Approved for interApproved for intermittent operation, comittent operation, continuous operantinuous operation and 72-hotion and 72-hour operation.ur operation.
Registered by DVGW and DIN CERTCORegistered by DVGW and DIN CERTCO
American Standard: American Standard: UL 372 UL 372 FM Class 7610FM Class 7610
Registration Number:Registration Number: MH25226 MH25226 3000072 3000072 and and 30104103010410

DURAG D-LX 100 All-In-One Specifications

General

Brand	DURAG
Model	D-LX 100 All-In-One
Category	Scanner
Language	English

Summary

General Information

Block Diagram

Functional Description

D-ZS 087-20 Digital Display Unit

Describes the function and display capabilities of the D-ZS 087-20 Digital Display Unit.

Self-Check

Fault

Error Codes of the 1st CPU

Lists error codes, yellow LED blinks, sources, and causes for CPU errors.

Installation

Start-Up

Describes the immediate readiness for operation upon power supply after mounting.

Programming the Flame Scanner

Setting the Flame Recognition Threshold

Explains setting the threshold for flame ON/OFF signals using a push button switch.

Flame Recognition Thresholds as a Function of the Rocker Switch Setting

Provides a table and graph showing flame recognition thresholds based on rocker switch settings.

Setting the Amplification

Describes adjusting the photo element signal amplification via a hook switch.

Adjusting the Flame Scanner D-LX 100...94Ex and D-LX 100.../95Ex

Details the procedure for programming explosion-proof housing models.

Safety Time

Integrated Flame Scanner

Ultraviolet Flame Scanner

Details UV flame scanners, their spectral sensitivity, and applications.

Infrared Flame Scanner

Explains IR flame scanners, spectral sensitivity, and applications.

Selection Criteria for the D-LX 100 All-In-One Flame Scanner

Provides a table comparing models, spectral ranges, fuels, and characteristics.

Overview of D-LX 100 All-In-One Flame Scanner

Lists different axial plug connection and flameproof housing versions.

Options

Lists available options like current output and safety time settings.

Technical Data

Technical Data of the Integrated Flame Scanner

Details optical angle of view and spectral sensitivity for scanner models.

Technical Data and Configuration of Inputs and Outputs

Covers power supply, fuse protection, current output, and relay contacts.

D-LX 100 Dimensional Drawing

Provides detailed physical dimensions and connection points of the scanner.

D-LX 100 Wiring Diagram

Illustrates the wiring connections for the flame scanner and power supply.

D-LX 100 ... /94 Ex and D-LX 100.../95Ex Housing for Hazardous Areas

Presents dimensional drawings and specifications for explosion-proof housings.

Wiring Diagram for D-LX 100.../94Ex and D-LX 100.../95Ex

Shows wiring diagrams specific to explosion-proof housing variants.

D-LX 100 ... /96 Ex for Hazardous Areas Class I, Div. 2, Group A,B,C&D

Provides dimensional drawings and specifications for Class I, Div. 2 hazardous areas.

D-LX 100 ... /97 Ex for Hazardous Areas Zone 2

Shows dimensional drawings and specifications for Zone 2 hazardous areas.

Cable and Shielding

Discusses cable types, shielding recommendations, and connections for power/output.

Maintenance and Service

Replacement of the Shutter and the UV-Photocell on the D-LX 100 UL

Details the procedure for replacing the shutter and UV-photocell assembly.

Layout of the Shutter block with the UV-Cell

Illustrates the layout of the shutter block and UV cell for replacement.

Available Accessories

D-ZS 087-20 Digital Display

Digital display unit for optimal orientation and flame recognition threshold calculation.

D-NG 24/05 AC-Power Supply

AC-Power supply unit for operating D-LX 100 flame scanners.

D-WSH 603 Weather Protection Hood

Weather protection hood for protecting flame scanners from rain and water.

D-NG 24/05 AC-Power Supply

D-ZS 033-1 Ball Type Adjustment Flange

D-ZS 033-III Ball Type Adjustment Flange

Weather Protection Hood

Approvals

DIN-CERTCO

Presents the DIN-CERTCO certificate for the D-LX 100 flame scanner.

EC Gas Appliance Directive 90/396/EC

Shows the EC Type Examination Certificate for the Gas Appliance Directive.

EC Pressure Equipment Directive 97/23/EC

Presents the EC Pressure Equipment Directive certification for the D-LX 100.

UL-Listing

Provides information regarding the UL-Listing for the flame monitor system.

CUL-Listing

Details the CUL-Listing for the flame monitor system, certified for Canada.

FM-Listing

Lists various DURAG flame monitor systems and their FM-Listing status.

ATEX Certificate

EC Declaration of Conformity