MAINTENANCE
21
For best mowing performance, the mower blade must be kept sharp. A dull blade does not
cut grass evenly and over-loads the motor. Under normal circumstances, sharpening the
blade twice during the mowing season is usually suf-ficient. However, if your lawn has sandy
soil, more frequent sharpenings may be required.
■ Following the instructions in the Replacing the Cutting Blade section, remove the mower
blade. DO NOT attempt to sharpen the blade while it is attached to the mower.
■ Using a fine-tooth file or stone, sharpen cutting edges on both ends of the blade, removing
equal amounts of material from both ends.
SHARPENING THE BLADE (Fig. 10)
Fig. 10
WARNING:
When removing, inspect the blade carefully. If blade is bent or
damaged, replace immediately with a new blade. Failure to replace a bent or damaged
blade could cause an accident resulting in possible serious injury.
To Next Page
Loading...
Need help?
General