2
3. The Air Compartments
a. DX86, DX96, DX104
These Duras Inflatable Boats have three air chambers in the tube and
an inflatable keel. The air chambers are completely separate and
ensure buoyancy in the event of a single chamber failure.
b. DX126, DX138
These Duras Inflatable Boats have four air chambers in the tube and an
inflatable keel. The air chambers are completely separate and ensure
buoyancy in the event of a single chamber failure.
4. The One-Way Valve
Your Duras Inflatable Boat utilizes a one-way valve, a proven design that has
been used for 20 years. This simple, rugged, one-way valve makes inflation
easy. The inner valve design allows air to flow into the hull but not out and
the outer valve cap makes the seal permanent. The plastic stem on the
inner valve allows the boat to be deflated. Push in the inner valve and turn it
to release air. Make sure the plastic stem is in the out position for inflation.
5. Rear Drain Valve
All Duras Inflatable Boats have a rear drain valve to drain water from the
inside of the hull.
6. Foot Pump
All Duras Inflatable Boats come with a deluxe high pressure foot pump to
ensure the boat is inflated to the recommended air pressure.
7. Pressure Gauge
All Duras Inflatable Boats come with a pressure gauge to ensure the boat is
inflated to the recommended air pressure.
8. Repair Kit
All Duras Inflatable Boats come with a repair kit which includes glue, patch
material and a valve removal tool.
To Next Page
Loading...