Need help?Do you have a question about the Duratech Heat Dura Pro and is the answer not in the manual?
Highlights key features like durability, installation flexibility, quiet operation, and advanced control systems.
Detailed performance data including heating capacity, power consumption, and COP for various models.
Table showing the physical dimensions for different DURAPRO heat pump models.
Guidance on selecting an optimal outdoor location for the heat pump, considering air flow and surroundings.
Recommendations on the optimal distance from the pool, considering heat loss through piping.
Diagrammatic representation of the heat pump installation setup, including water connections.
Importance of installing a check valve to protect the heat exchanger from chemical backflow.
Detailed specifications and requirements for electrical connections, including cable size and fuse ratings.
Step-by-step procedure for safely starting the heat pump after installation.
Explanation of condensation formation and how to distinguish it from leaks.
Overview of the main display screen and its components.
Detailed explanation of the functions of each button on the control interface.
Instructions for activating and configuring direct and timed silent operation modes.
Guide to selecting different operating modes like cooling, heating, or automatic.
How to access and interpret operational statistics and performance curves.
Procedure for setting the desired swimming pool water temperature.
How to access the error code history menu on the control interface.
List of fault codes, their reasons, and recommended elimination methods.
Diagram and definitions for the wire control interface terminals.
Diagram and definition of the controller's interface connections.
Important safety precautions and warnings for installation and operation.
Detailed table specifying required supply cable sizes based on unit current ratings.
Information regarding the product warranty terms, limitations, and claims process.
Comparison table of saturation temperatures for different refrigerants at various pressures.
General| Category | Heat Pump |
|---|---|
| Refrigerant Type | R-410A |
| Maximum Operating Temperature (Heating) | Up to -22°F |
| Voltage | 208/230V |
| Phase | 1 |
| Model | Duratech Heat Dura Pro |
To Next Page