EasyManua.ls Logo

Duratech HOT Splash HS40 - Preparing the Heat Pump for Use; Typical Configuration and Distance

Duratech HOT Splash HS40
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Hot Splash
(1)
Min. 2
Meter
circulation
pump
Filter
(2)
A free area of minimum 0,3 meter around the heat pump has to be kept clear from any object(1).
Do not obstruct the fan, leave at least 1.5m free unobstructed space in front of the fan.
Put the heat pump on a at, solid base.
4. Preparing the heat pump for use
4.1. Typical conguration & distance from the pool
The heat pump should be located at least 2m away from the swimming pool. In normal operation, the air taken
by the heat pump is cooled down and water may condens on the ns of the evaporator and run out of the
bottom of the unit.
3.1. Maximum pool volume Europe
Up to 20m
3
*
Up to 12m
3
*
Up to 8m
3
*
*Only in summer

Related product manuals