DuraTrel Kingston 11300

To Next Page

Model#

11300

Kingston Pergola

W221122-A5080

*W201121-A2040*

QUESTIONS? COMMENTS? CONTACT US!

115 Vision Parkway 1-877-258-6020

P.O. Box 122 www.dura-trel.com

Sheboygan Falls, WI 53085 sales@dura-trel.com

Assembly Instruction Manual

Please read instructions thoroughly before beginning assembly.

Check boxes carefully for contents listed. Some parts are packaged inside of others.

Assemble on a clean, flat, non-abrasive surface to prevent scratching.

In the event of missing or damaged parts please call or email our customer service department at

the contact info below.

Tools Required

-Battery or Electric Drill (#2 phillips bit)

-Tape Measure

-Hammer or Rubber Mallet (recommended)

-Shovel or Post Hole Digger (recommended)

Need help?

Do you have a question about the DuraTrel Kingston 11300 and is the answer not in the manual?

Summary

Kingston Pergola Assembly Guide

Tools Required for Assembly

Lists essential tools needed for the assembly process, including drill, tape measure, and mallet.

Pergola Installation Methods

Soft Ground Installation Method

Details installing the pergola using ground anchors in soft ground.

Permanent Installation Method

Describes installing the pergola with ground anchors in cement for permanent placement.

Kingston Pergola Warranty Information

20 Year Guarantee and Claims

Explains the 20-year warranty coverage, terms, exclusions, and how to make a claim.

Warranty Exclusions and Limitations

Details conditions not covered by the warranty, including misuse and environmental damage.