Durite 0-647-42 User Manual

12/24V 12A Digital Battery Charger - NORM, AGM, STD, GEL
& Li-Ion
Part 0-647-42
0-647-42-LEAF
www.durite.co.uk
GENERAL
Before using this unit please read these instructions carefully. Take special care to follow
the warnings and safety suggestions listed below. Keep these instructions for future refer-
ence. There are no user-serviceable parts within the unit, refer servicing to qualied service
personnel.
IMPORTANT SAFETY INSTRUCTIONS
1. This appliance is not intended for use by persons (including children) with reduced phys-
ical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person respon-
sible for their safety. Children should be supervised to ensure that they do not play with the
appliance.
2. Working in vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases
during normal battery operation. For this reason, it is of utmost important that each time
before using your charger, you read this manual and follow the instruction exactly.
3. To reduce risk of battery explosion, follow these instructions and those published by the
battery manufacturer and manufacturer of any equipment you intend to use in vicinity of
battery. Review cautionary markings on these products and on engine
4.Use the charger in door only, do not expose it to rain.

Durite 0-647-42 Specifications

Power

rated input voltage	100 VAC - 240 VAC
rated output voltage	12 V DC / 24 V DC
max input power	37 W ~ 215 W

Operating Environment

working temperature	-10 C - 40 C
storage temperature	-20 C - 60 C

Charging Specifications

max charging voltage	14.6 V DC ±0.2 V / 29.2 V DC ±0.2 V
rated output current	12 A
maintained battery capacity	3-200 Ah

Weight and Dimensions

length	219 mm
height	123 mm
width	199 mm
weight	1.3 kg

Summary

Important Safety Instructions

Appliance Usage and Supervision

Restrictions on who can use the appliance and supervision requirements for children.

Battery Handling and Explosion Risks

Dangers of lead-acid batteries, explosion risks, and proper handling instructions.

Environmental and Operational Safety

Guidance on indoor use, avoiding rain, and general operational advice.

General Warnings

Battery Compatibility and Usage Warnings

Warnings regarding battery types, output socket usage, and recommended attachments.

Charger Condition and Maintenance Warnings

Instructions for handling damaged chargers, cords, and preventing disassembly.

Operational Environment and Hazard Avoidance

Guidance on ventilation, placement, avoiding rain, frozen batteries, sparks, and flames.

Personal Safety Precautions

Protective gear, proximity, first aid for acid contact, and removing metal items.

Application and Operation

Charger Application Scope

Details the wide range of vehicles and systems the charger is used for.

Charging Procedure for Lead Acid Batteries

Step-by-step instructions for connecting and disconnecting the charger for single batteries.

Charging Procedure for Car Batteries

Instructions for connecting, selecting modes, and disconnecting for car batteries.

Charger Controls and Modes

Control Panel Identification

Identification of buttons like Enter/Exit and selection buttons on the charger.

Charging Mode Selection Guide

Table detailing voltage, battery type, charging mode, and current selections.

Charging Stages and Status Display

Battery Charging Process Stages

Explanation of the nine stages of the battery charging process.

LCD Status Display Key

Explanation of icons and indicators shown on the LCD screen.

Code Display and Protection Features

Charger Mode and Error Code Display

Explanation of mode abbreviations (AUT, PUL, REC) and error codes (F01-F06).

Protection and Activation Features

Description of automatic float mode, short-circuit, over-temperature, and low-voltage activation.

Troubleshooting and Specifications

Troubleshooting Common Issues

Guidance for issues like no power, no AC output, and indicator lights.

Product Specifications

Technical details including battery types, voltage, current, power, dimensions, and weight.