DUROFIX RM 6V Series - Usage and Power Management; Auto Power Off and Manual Power Off; How to Use as a Torque Wrench; Incorrect Operation Example

1English1
English -11
Overload will damage this wrench and lose its accuracy. Please return
this wrench to an authorized service center to calibrate it and eliminate the “Err”.
AUTO POWER OFF/POWER OFF
This wrench will be shut off automatically after 60 seconds of no use. Or directly shut
off the wrench, just press the Power Button (13) more than 2 seconds.
HOW TO USE AS A TORQUE WRENCH
Connects this wrench and a socket together. Then handle the wrench handle center as
shown below.
INCORRECT OPERATION
The torque or force only applies on the handle center.
NOTE