DUROFIX RW1216-3 User Manual

We reserve the right to change specifications without prior notice. E & OE
RW1216-3
CORDLESS RATCHET WRENCH
PRODUCT INFORMATION MANUAL
Manuel informations du produit
Manual información del producto
English
Français
Español
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY,
OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT.
CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTE CONCERNANT LA
SECURITE, L'OPERATION, LA MAINTENANCE ET LE STOCKAGE DE CE
PRODUIT.
ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE ACERCA DE LA
SEGURIDAD, FUNCIONAMIENTO, MANTENIMIENTO Y ALMACENAMIENTO DE
ESTE PRODUCTO.
DO NOT ATTEMPT TO OPERATE THE TOOL UNTIL YOU HAVE READ AND UNDERSTOOD ALL
INSTRUCTIONS AND SAFETY RULES CONTAINED IN THIS MANUAL. FAILURE TO COMPLY
MAY RESULT IN ACCIDEN
TS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL
INJURY. SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE AND REVIEW IT
FREQUENTLY FOR SAFE OPERATION.
NE PAS TENTER D'OPERER L'OUTIL TANT QUE VOUS N'AVEZ PAS LU ET COMPRIS TOUTES
LES INSTRUCTIONS ET REGLES DE SECURITE CONTENUES DANS CE MANUEL. SINON VOUS
RISQUEZ DES ACCIDENTS TELS QU'UN INCENDIE, UNE ELECTROCUTION, OU DES
BLESSURES CORPORELLES GRAVES. CONSERVEZ CE MODE D'EMPLOI EN CAS DE BESOIN ET
RELISEZ-LE SOUVENT POUR UTILISER VOTRE OUTIL EN TOUTE SECURITE.
NO UTILICE ESTA HERRAMIENTA HASTA HABER LEÍDO Y COMPRENDIDO TODAS
LAS
INSTRUCCIONES Y NORMAS DE SEGURIDAD CONTENIDAS EN ESTE MANUAL. SI NO LO
HACE PODRÍA PROVOCAR ACCIDENTES CON FUEGO, DESCARGA ELÉCTRICA O LESIONES
PERSONALES SERIAS. GUARDE ESTE MANUAL DE INSTRUCCIONES PARA SU CONSULTA EN
EL FUTURO Y REVÍSELO FRECUENTEMENTE PARA UN USO SEGURO.
40733255-NA

DUROFIX RW1216-3 Specifications

General

Type	Cordless Impact Wrench
Voltage	12V
Max. Torque	160 Nm
Battery Type	Li-Ion
Drive Size	3/8"

Summary

Intended Use

Product Application

This tool is designed for personal use to remove and install threaded fasteners.

General Safety Rules

Understanding Safety Symbols

Explains how to interpret safety symbols, words, and labels for hazard identification.

Warning Label Identification

Details safety labels and their meanings, including wear protection and tool operation.

Work Area Safety

Guidelines for maintaining a clean, well-lit work area and avoiding hazards.

Electrical Safety

Electrical Hazard Precautions

Advises against contact with grounded surfaces and exposure to wet conditions.

Personal Safety

Operator Awareness and Attire

Emphasizes staying alert, using safety equipment, and dressing appropriately.

Tool Operation Posture

Guides on maintaining proper footing, balance, and avoiding overreaching.

Tool Use and Care

Workpiece Securing

Recommends using clamps or other methods to secure the workpiece for stable operation.

Tool Operation Guidelines

Covers proper tool usage, avoiding force, and checking for switch functionality.

Preventive Safety Measures

Includes disconnecting power, storing tools safely, and maintaining them.

Battery Tool Use and Care

Battery Handling and Charging

Provides safety instructions for inserting, charging, and storing battery packs.

Battery Fluid Safety

Advises on precautions regarding potential battery fluid leakage and contact.

Service and Maintenance

Qualified Service Requirements

Stresses the importance of using qualified personnel and identical replacement parts for service.

Specific Safety Rules

Details specific safety precautions during operation, bit changes, and handling materials.

Symbols

Voltage Symbol

Represents Voltage (potential).

No Load Speed Symbol

Represents No-load Rotational Speed.

Weight Symbol

Represents weight, typically measured in kilograms.

Type of Current Symbol

Represents Direct Current.

Revolutions per Minute Symbol

Indicates Revolutions, Surface Speed, Strokes, etc. per Minute.

Functional Description

Controls and Components

Identifies key parts like Output Drive, Levers, Grips, and Battery Pack.

Specifications

Product Model and Voltage

Details the Model Number (RW1216-3) and Voltage (12V d.c.).

Anvil and Torque Specifications

Specifies Anvil size (3/8"sq.) and Max. Tightening Torque (65/88 ft-lbs/Nm).

Speed and Weight

Lists No Load Speed (0-260 rpm) and Tool Weight (3.00/1.36 lbs/kg).

Assembly

Battery Pack Installation

Instructions for removing and installing the battery pack onto the tool.

Socket Installation

Procedure for inserting a socket into the anvil and ensuring it is fixed.

Socket Removal

Socket Ejection Method

How to pull out the socket directly from the anvil.

Forward / Reverse Lever

Direction Control Operation

Explains how to use the lever for forward (F) and reverse (R) rotation.

Operation

Pre-Operation Checks

Always check the direction of rotation before using the tool.

Post-Use Cooling Period

Allow tool to idle for 2 minutes after continuous use before changing battery.

Fastening Torque Factors

Lists factors affecting torque: voltage, socket size, speed, bolt, and material.

Maintenance

Cleaning Procedures

Instructions for cleaning air vents and exterior parts using dry air and mild detergent.

Lubrication Information

Notes that the tool is factory-lubricated for life and requires no further lubrication.

Accessories

Accessory Usage Recommendations

Emphasizes using only manufacturer-recommended accessories for safety.

Protecting the Environment

Disposal and Recycling

Advises checking with environmental agencies for disposal restrictions or returning to service centers.