DUROFIX RW1216-3 - Specifications; Product Model and Voltage; Anvil and Torque Specifications; Speed and Weight

1English1
English -7
SPECIFICATIONS
Model Number
Unit
RW1216-3
Voltage
V d.c.
12
Anvil
in.
3/8”sq.
Max. Tightening Torque
ft-lbs/Nm 65 / 88
No Load Speed
rpm
0-260
Tool Weight (with battery 2.0Ah) lbs/kg
3.00 / 1.36
ASSEMBLY
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 2A), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig. 2B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
Fig. 2
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (see Fig.3).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
B
A