7
Operating Instructions
Boiling Water
Press the “Boil” button and the appliance will begin to operate and the LED
light will ash. When the water reaches the temperature you have chosen, the
LED light will be solid in the temperature range: (90℃). The LED light will go
out when the water temperature drops out of the temperature the range
(﹤90℃) after which the appliance switches off.
Heating Water
A. Press “40℃”, “60℃”, “80℃” or “100℃” only when the water temperature
lowers than its range. The LED light will illuminate and ash when the
appliance is in operation. After the water reaches the temperature you have
chosen, the LED light will be solid in the temperature range: 40℃~35℃,
60℃~55℃ or 80℃~75℃. The LED light will switch off when the water
temperature drops out of the temperature range (﹤55℃ or ﹤75℃).
B.After water has boiled to 100℃ and is cooling down, if you press the “40℃”,
“60℃”, “80℃” or “100℃” key before the water has cooled below those
temperatures, the appliance will not operate.
• If the kettle is damaged in any way, please stop usage and contact the
manufacturer.
• Do not allow the power cord to hang on the edge of the table.
• Do not place the kettle on or next to high temperature surfaces.
• Please do not put the kettle on boil when there is a lack of water. It is easy to
damage the heating plate and shorten the lifespan of the appliance.
• When using, keep appliance out of reach of children.
• Do not dip the product into water or other liquids.
• After boiling, please do not touch the steam emitted from the spout.
• When pouring, please keep a safe distance away from the kettle in order to
avoid getting into contact with hot water
To Next Page
Loading...
