Duronic MF500 - Setting up the MF500; How to Use

• Disconnect the mains plug from the power socket if you are going to be
absent for long periods.
• Make sure that the appliance and its mains cable are not located close to
hot surfaces.
• Be careful with heated milk as it could burn if spilt
Setting up the MF500
7
WHISK FUNCTION
MAXIMUM
CAPACITY
Frothing whisk Frothing 260ml
Stirring whisk Heating/Stirring 500ml
How to use
You can use the MF500 milk frother
to make a whole variety of hot
and cold drinks. It comes with two
different whisk attachments; one is
for frothing milk and the other is for
heating/stirring milk.
You can use any milk you wish (dairy,
nut-based, plant-based, powdered
and even hot chocolate powdered).
However, please bear in mind that
different milks will froth and heat
differently.
Please note: the maximum amount
of milk you can use depends on what
you wish to do with the machine. If
using dairy milk, we recommend using
semi-skimmed milk. If you prefer to use
whole fat milk, do not use more than
120ml as it will heat, froth and expand
much quicker in the jug.
• If you want to froth the milk, the
maximum amount you can add is
260ml because the luid expands as it
froths up (max 120ml whole fat dairy
milk).
• If you only want to heat/stir milk, the
maximum amount you can add is
500ml.