Durst DA-900 - User Manual

To Next Page

Main Page

Table of Contents2
Base4
Column4
DANOCON 105 Twin Condenser4
DANOCON 50 Twin Condenser4
DUONEG Negative Carrier4
Enlarger Head4
Fi Iter Drawer4
Hexagonal Screws for Fixing the Column in the Base4
Mirror Housing4
Projection Board4
Angular Bar on Column5
Lens Carrier5
Lock of the Quick-Locking Lens Holder5
Serial Number Plate5
Cable with Plug and Switch6
Fixing Screws for AUTOCALO6
Guide Tracks for the Heat Absorbing Filter6
Cover of the I Ight Hood7
Red Filter Wheel-Grip7
Condenser Fixing Bar8
Condenser Grip (DANOCON 50)8
Grip Bar for Opening the Serial Number Plate8
Hooks on the Condenser Mounti Ng8
Lamp Socket8
Pushing-Bar for Changing the Lenses8
Shutter Wheel-Grip8
Locking Screw for the Enlarger Head Adjustment9
- Wheel-Grip for Focusing both the Lenses12
Focus Variator Wheel-Grip16
Lens Carriage16
Locking Knob of Focus Variator17
Cross-Slot Screws on the Base Board20
Green Filter21
Steel Bands22

Need help?

Do you have a question about the Durst DA-900 and is the answer not in the manual?

Summary

Assembly of the Durst DA 900

Column and Head Assembly

Instructions for inserting and fastening the column and enlarger head into the base.

Illumination System

Light Sources

Details on opal lamps, their use, and maintenance for optimal illumination.

Condenser Setup

Condenser for 28;50 mm Lens Combination

Condenser for 75;50, 80;50, and 105;50 mm Combinations

Enlargement Range Specifications

Inserting the Negatives

AUTONEG Negative Carrier

DUONEG Negative Carrier

Automatic Focusing System Operation

Focus Variator Adjustment

Manual Focusing Adjustment

Colour Enlargements

Copying Operations

Maintenance and Care

Durst DA-900 Specifications

General

Brand	Durst
Model	DA-900
Category	Laboratory Equipment
Language	English