To Next PageTo Next Page
Need help?Do you have a question about the DutchWest 2462 and is the answer not in the manual?
General| Model | 2462 |
|---|---|
| Category | Heater |
| Type | Wood Stove |
| Fuel Type | Wood |
| Maximum Log Length | 18 inches |
| Efficiency | 75% |
| Firebox Material | Cast Iron |
| EPA Certified | Yes |
Recommends installation and servicing by NFI certified professionals.
Describes required chimney types for connecting the heater.
Instructions for inspecting and preparing existing masonry chimneys.
Guidelines for installing factory-built metal chimneys.
Instructions on connecting the stove to the chimney.
Specifies appropriate chimney flue sizes for different models.
Information on assembling and installing double-wall connectors.
Step-by-step instructions for assembling single-wall connectors.
Procedure for connecting chimney connector to prefabricated chimneys.
Procedure for connecting chimney connector to masonry chimneys.
Instructions for installing the heater connector above a fireplace.
Instructions for installing the heater connector through a fireplace.
Guidelines for passing the chimney connector through combustible walls.
Requirements for protecting floors from stove heat and embers.
General clearance guidance for combustible materials around the stove.
Methods to safely reduce clearance requirements.
Specific clearance requirements for fireplace installations.
List of parts included with the heater and instructions for unpacking.
Instructions for attaching legs and the bottom heat shield.
Overview of the heater's main controls and features.
Explanation of primary and secondary air controls for fire management.
Details on how the damper operates for combustion control.
Information on front and side loading doors for wood.
Guidance on appropriate fuels and materials to burn.
Tips for adjusting air controls based on draft and desired heat.
Instructions on building and maintaining an efficient wood fire.
Step-by-step guide for starting a fire in the stove.
Techniques for adding wood and reviving a dying fire.
Guidance on how often and how to remove ashes.
Procedures for safely handling and disposing of hot ashes.
Instructions for cleaning and maintaining the stove's cast iron finish.
Methods for cleaning the stove's glass door panel.
Procedure for adjusting the door latch for a proper seal.
How to test and repair door gaskets for air leaks.
Procedure for adjusting the damper linkage for a tight seal.
How to adjust the tension of the primary air control lever.
Guidance on inspecting and cleaning the chimney and connector.
Daily and bi-monthly maintenance tasks for the stove.
Bi-monthly and yearly maintenance for the chimney connector.
Indicators and tests to identify combustor performance issues.
Steps for safely removing and inspecting the catalytic combustor.
Characteristics of masonry chimneys affecting draft.
Characteristics of steel chimneys affecting draft.
Impact of chimney location on draft and performance.
Importance of matching flue size to stove outlet for optimal draft.
Recommendations for pipe and chimney configuration for good draft.
Requirement for a dedicated flue for the stove.
Impact of fuel type and quality on stove performance and draft.
Causes and prevention of creosote accumulation.
Conditions causing backpuffing and how to resolve it.
Methods for testing chimney draft strength.
How house tightness and appliances affect draft.
Warranty coverage for the woodburning stove for three years.
Warranty coverage for specific stove parts for one year.
Warranty terms for the catalytic combustor.
Conditions that void the warranty or are not covered.
Procedure for requesting warranty service or repairs.
