DUURA DI50-O User Manual

60 pages

To Next Page

032318

SERVICE, INSTALLATION, AND INSTRUCTION MANUAL

MANUEL D’ENTRETIEN, D’INSTALLATION ET D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES, INSTALACIÓN Y MANTENIMIENTO

DI50 DI50-O

www. DUURA.com | TechService@DUURA.com

825 Southwood Road Avondale, PA 19311

DI50

DI50-O

SELF CONTAINED ICE MAKER │

MACHINE À GLAÇONS AUTONOME │

MÁQUINA AUTÓNOMA PARA HACER HIELO

PLEASE READ CAREFULLY │

VEUILLEZ LIRE AVEC SOIN │ POR FAVOR, LEER CON CUIDADO

Questions and Answers:

L
leah59Aug 16, 2025
What to do if my DUURA Ice Maker doesn’t operate?
- J
  Jamie FloresAug 16, 2025
  Here are a few potential reasons why your ice maker might not be working: * It might be unplugged, so ensure it is properly plugged in. * A fuse might be blown, in which case you should replace it. If this happens repeatedly, have a service technician check for a short circuit. * The power button could be off; switch it to the 'ON' position. * The ice storage bin may be full, preventing further ice production. Remove some ice and make sure the ice-full probe isn't blocked.
S
Sean FullerAug 19, 2025
What to do if my DUURA DI50-O stops suddenly while making ice?
- D
  dhamiltonAug 19, 2025
  Your ice maker may stop suddenly due to a few reasons: * Check if the electricity is off and reconnect the power supply line. * If the room temperature is outside the specified range, disconnect the ice maker and wait until the temperature returns to normal. * The ice storage bin might be full; remove some ice and ensure the ice-full probe is unobstructed.

DUURA DI50-O Specifications

General

Ice Production Capacity	50 kg/24h
Voltage	220-240V
Weight	35 kg
Material	Stainless Steel
Frequency	50 Hz

Summary

ICE MAKER SAFETY

Safety Alert Symbols and Meanings

Explains DANGER, WARNING, and CAUTION symbols and their implications for user safety.

Basic Operational Safety Precautions

Lists essential safety steps to reduce fire, shock, and injury risks during operation.

Key Installation Safeguards

Covers crucial installation and handling safety measures to prevent potential hazards.

INSTALLATION AND OPERATIONAL SAFETY

Installation Environment and Ventilation

Details proper installation environment, clearances, and temperature ranges for safe operation.

Electrical Safety and Grounding

Emphasizes correct grounding, dedicated circuits, and cord handling for electrical safety.

Extension Cord Usage Warning

Strongly advises against using extension cords due to potential safety risks.

TECHNICAL INFORMATION

Model Specifications Overview

Provides detailed technical data for DI50 and DI50-O ice maker models.

INTRODUCTION

Product Series Introduction

Introduces the DUURA DI50 ice maker series and its primary benefits.

COMPONENT LOCATIONS

D150 Component Identification

Lists and identifies external components of the D150 model with multilingual labels.

D150-O Component Identification

Lists and identifies external components of the D150-O model with multilingual labels.

ICE MAKER INSTALLATION GUIDELINES

Handling and Packaging Removal

Instructions for safely moving the unit and removing packaging materials.

Pre-Operation Cleaning

Directs users to clean the interior before initial operation as per maintenance section.

Installation Clearances and Environment

Specifies required space and environmental conditions for proper installation.

INSTALLATION REQUIREMENTS

Operating Environment and Water Specifications

Defines optimal ambient, water temperatures, and filter recommendations.

Electrical Connection and Grounding Details

Details electrical supply needs, grounding, and dedicated circuit requirements.

Leveling the Ice Maker Procedure

Provides detailed steps for leveling the unit using casters for optimal function.

DOOR SWING REVERSAL PROCEDURE

D150-O Door Swing Reversal

Step-by-step instructions for reversing the door swing on the D150-O model.

WATER SUPPLY AND DRAINAGE INSTALLATION

D150 Door Swing Reversal

Step-by-step instructions for reversing the door swing on the D150 model.

Water Supply Connection Requirements

Covers water pressure requirements and connecting the water line.

DRAINAGE SYSTEM INSTALLATION

Drain Line Connection Instructions

Instructions for connecting the drain hose, including routing and slope requirements.

INSTALLATION TYPES AND DRAINAGE CONSIDERATIONS

Installation Method Guidelines

Outlines considerations for mobile, enclosed, and built-in installation methods.

Built-in Installation Drain Requirements

Specific steps for built-in installation, including drain and water connection.

ICE MAKER OPERATION AND PREPARATION

Pre-Operation Checklist

A comprehensive list of checks to perform before operating the ice maker.

Operating the Ice Maker

Explains the automatic operation process and stages of ice making.

ICE PRODUCTION CYCLES AND DRAINAGE

Ice Freeze and Harvest Cycle Details

Details the mechanics of the ice freeze and harvest stages.

Water Usage in Ice Making Process

Explains how water is used and frozen to create ice cubes.

Pump-Out Drain System Operation

Describes the components and function of the DI50P/DI50P-O drain system.

DRAINAGE AND OPERATION NOTES

Drain Pump Functionality Explained

Details how the drain pump activates and its lifting capabilities.

Normal Operating Sounds Identification

Lists typical sounds and their causes, helping identify normal operation.

Preparing Unit for Long-Term Storage

Provides instructions for draining and preparing the unit for storage.

CLEANING AND MAINTENANCE FUNDAMENTALS

Importance of Periodic Maintenance

Stresses the need for regular cleaning for efficiency and longevity.

Items Not to Store in Ice Bin

Warns against storing items other than ice in the storage bin.

Components Requiring Regular Cleaning

Lists the specific parts of the ice maker that need regular cleaning.

CLEANING PROCEDURES

Exterior Surface Cleaning Guide

Instructions for cleaning the outer cabinet and door, including stainless steel.

Interior Cleaning and Sanitizing Steps

Detailed steps for cleaning and sanitizing the ice bin and interior surfaces.

COMPONENT MAINTENANCE PROCEDURES

Condenser Cleaning Guide

Explains the importance and method for cleaning the condenser.

Water Distribution Tube Cleaning

Steps to clear blockages in the water distribution tube for optimal ice output.

Ice-Making System Cleaning Process

Instructions for cleaning mineral buildup from the ice-making system.

ICE SYSTEM CLEANING AND CONTROL PANEL

Ice-Making System Rinse and Sanitize

Final steps for rinsing the ice system and applying a sanitizing solution.

Control Panel Layout Overview

Identifies the layout and buttons on the control panels for DI50 and DI50-O.

Control Panel LED and Button Functions

Explains the meaning of each indicator light and button on the control panel.

MAJOR FUNCTIONS AND TROUBLESHOOTING

Key Ice Maker Operational Features

Summarizes automatic operation, bin-full stop, and LED indicators.

Troubleshooting Unit Not Operating

Addresses issues like unplugging, blown fuses, or power button status.

Troubleshooting Water and Ice Issues

Solves problems with water feed, bin filling, leaks, and cube formation.

Troubleshooting Unit Stops and Electrical Problems

Helps diagnose sudden shutdowns, electrical issues, scaling, and temperature problems.

Troubleshooting Buzzer Alarm

Provides steps to resolve the buzzer alarm related to the drain system.