DVDO iScan VP50PRO User Manual

DVDO by Anchor Bay Technologies, Inc.
983 University Avenue, Building A
Los Gatos, CA 95032 USA
Tel: 866-423-DVDO (3836) Fax: 408-379-3845
www.dvdo.com
Customer Support
Tel: 866-423-DVDO (3836) Extension 333
help@dvdo.com
O W N E R ’ S M A N U A L
H I G H - D E F I N I T I O N V I D E O P R O C E S S O R & H U B

DVDO iScan VP50PRO Specifications

General

Brand	DVDO
Model	iScan VP50PRO
Category	Media Converter
Language	English

Summary

Getting Started

Menu Navigation

Installation Guidelines

Recommendations for optimal iScan VP50PRO performance and safety.

Basic Operation

Front Panel Overview

Back Panel Overview

Video Inputs

Details the eleven video inputs supported by the iScan VP50PRO.

Video Outputs

Describes the analog and digital video output signal types.

Audio Inputs

Audio Outputs

Setup

Initial Setup

Step 1: Power Up

Step 2: Connect to Display

Guide for connecting the iScan VP50PRO to a display device.

Step 3: Select Optimal Output Resolution

Configure the iScan VP50PRO for the best picture from the connected display.

Step 4: Connecting Your Sources

Guide for connecting up to 11 video sources to the iScan VP50PRO.

Step 5: Configure Input Sources for Maximum Performance

Setup inputs on sources for optimal performance with the iScan VP50PRO.

Step 6: Deinterlacing Mode and PReP

Adjusting deinterlacing modes and PReP for optimal video processing.

Step 7: Assigning Audio Inputs to Video Inputs

Step 8: Display Optimization

Step 9: Source Optimization

Menu Options

Input Select and Aspect Ratio

Input Adjustments

Fine-tuning input signals with noise reduction, deinterlacing, and PReP.

HDMI Configuration

Audio Input and AV Lip Sync

Picture Controls

Adjusting image parameters like brightness, contrast, saturation, and hue.

Configuration Settings