36
camera. Below lists the maximum recording rate of each camera.
NTSC(PAL) 360x240 720x240 720x480
4 Channel DVR
120(100) 120(100) 60(50)
8 Channel DVR
240(200) 120(100) 60(50)
16 Channel DVR
480(400) 240(200) 120(100)
Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select one of
Super, High and Std.
Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
Choose ‘OK’ to confirm the setting.
Please click ( ) Emergency and the following screen will appear Emergency.
The Emergency menu will allow user to set Emergency videos.
Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User may not change camera titles
here.
Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 720x480, 720x240 and 360x240. (NTSC)
Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
NTSC(PAL) 360x240 720x240 720x480
4 Channel DVR
120(100) 120(100) 60(50)
8 Channel DVR
240(200) 120(100) 60(50)
16 Channel DVR
480(400) 240(200) 120(100)
Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select one of
Super, High and Std.
Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
Choose ‘OK’ to confirm the setting.
4.5.2 Schedule
Please click ( ) RECORD>Schedule.
Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
Click ( ) Camera frame to select Camera No. 1.
Please set the recording mode as follows:
① Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and PreAlarm)). If user
wants to stop recording, please clear all check boxes.
Emergency