DVTEL CM-4221-00 User Manual

CM-4221 Installation Manual
Quasar CM-4221
Series Mini-Dome
Camera User and
Installation Guide
Installation and configuration instructions
for the CM-4221 Series IP Mini-dome
Camera
 CM-4221-00 Indoor camera with
varifocal lens
 CM-4221-01 Outdoor camera with
varifocal lens
 CM-4221-10 Indoor camera with
motorized lens
 CM-4221-10-I Indoor camera with
motorized lens and infrared LED
illuminator
 CM-4221-11 Outdoor camera with
motorized lens
 CM-4221-11-I Outdoor camera with
motorized lens and infrared LED
illuminator
All text and figures included in this publication are the exclusive property of DVTel Inc., and may not be copied, reproduced or
used in any way without the express written permission of DVTel Inc. Information in this document is subject to change without
notice. This document also contains registered trademarks and service marks that are owned by their respective companies or
organizations.
Copyright © 2012, DVTel Inc., All Rights Reserved.

DVTEL CM-4221-00 Specifications

General

Model	CM-4221-00
Type	IP Camera
Resolution	1920 x 1080
Video Compression	H.264, MJPEG
Minimum Illumination	0.1 Lux (Color), 0.01 Lux (B/W)
Audio	Two-way Audio
Ethernet Port	10/100 Mbps
Ingress Protection	IP66
Lens Mount	CS
Frame Rate	30 fps
Protocols	HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, TCP, UDP
Power	PoE (IEEE 802.3af)
Operating Temperature	-10°C to 50°C
Day/Night	IR Cut Filter

Summary

Camera Introduction and Specifications

Key Features

Lists key functionalities like H.264 compression, motion detection, and network capabilities.

Package Contents

Details the items included in the camera package for installation.

Model Dimensions and Connectors

Provides physical dimensions, connector details, and pinouts for CM-4221 models.

Installation and Initial Setup

System Requirements for Web Access

Outlines PC specifications needed for accessing the camera via a web browser.

Installation Procedures and Mounting

Covers indoor/outdoor installation, power/ethernet, mounting, and view adjustment.

Initial Camera Configuration

Steps for IP configuration, base plate removal, and mounting.

Adjusting Camera View

Instructions for framing and adjusting the camera's pan, tilt, and zoom.

Configuration and Operation

Network Access and Device Search

Explains how to find and configure camera network settings using Device Search.

Browser-Based Viewer and Home Page

Introduces the web interface, navigation, home page functions, and camera controls.

System, Network, and Storage Settings

Covers host, security, network, QoS, UPnP, DDNS, mail, FTP, HTTP, application, motion detection, network failure, tampering, storage, recording, and file location.

Video, Audio, and Camera Settings

Configuration for video resolution, frame rate, compression, audio, exposure, white balance, picture, backlight, zoom, IR, WDR, and noise reduction.

Appendices and Support

Technical Specifications

Detailed technical data for the CM-4221 series cameras.

Internet Security and UPnP Setup

Guides for configuring browser security settings and enabling UPnP discovery.

Accessories and Contact Information

Lists available mounting accessories and DVTel contact details.