DVTEL CM-4221-11-I - User Manual

CM-4221 Installation Manual
Quasar CM-4221
Series Mini-Dome
Camera User and
Installation Guide
Installation and configuration instructions
for the CM-4221 Series IP Mini-dome
Camera
 CM-4221-00 Indoor camera with
varifocal lens
 CM-4221-01 Outdoor camera with
varifocal lens
 CM-4221-10 Indoor camera with
motorized lens
 CM-4221-10-I Indoor camera with
motorized lens and infrared LED
illuminator
 CM-4221-11 Outdoor camera with
motorized lens
 CM-4221-11-I Outdoor camera with
motorized lens and infrared LED
illuminator
All text and figures included in this publication are the exclusive property of DVTel Inc., and may not be copied, reproduced or
used in any way without the express written permission of DVTel Inc. Information in this document is subject to change without
notice. This document also contains registered trademarks and service marks that are owned by their respective companies or
organizations.
Copyright © 2012, DVTel Inc., All Rights Reserved.

Summary

Camera Installation Guide

Indoor and Outdoor Installation

Power and Ethernet Cable Connection

Explains how to connect the camera's power and Ethernet cables.

Initial Camera Configuration

Guides through the initial network and IP address configuration process.

Mounting Instructions

Adjusting Camera View

Explains how to adjust the camera's view, focus, and framing.

Accessing the Camera

Configuration and Operation

Browser-Based Viewer Introduction

Home Page Controls

System Settings

Motion Detection Settings

Configures motion detection sensitivity, areas, and triggered actions.

Storage Management and Recording

Video Streaming Settings

Configures video resolution, compression, and frame rate for streaming.

Camera Settings

DVTEL CM-4221-11-I Specifications

General

Brand	DVTEL
Model	CM-4221-11-I
Category	IP Camera
Language	English