F. LOW LIGHT
• SLOW SHUTTER : Control Image brightness by adjusting
shutter speed
- AGC : shutter speed setting( Range 28 to 48)
- MAX FIELD : Shutter open from Min. x2 to Max. x32
filed accumulation period.
• B&W SS (Black and White Slow Shutter)
• GAIN : To get brighter picture.
G. SYNC
• INTERNAL : Internal synchronization
• LINE LOCK : Phase adjustment may be necessary in multiple camera
installations to prevent picture roll when switching between cameras
H. RS485
• CAMERA # : Selectable from 1 to 255
(Note : Pelco D is the default)
I. DAY/NIGHT
•
F. LOW LIGHT
• SLOW SHUTTER : Control Image brightness by adjusting
shutter speed
- AGC : shutter speed setting( Range 28 to 48)
- MAX FIELD : Shutter open from Min. x2 to Max. x32
filed accumulation period.
• B&W SS (Black and White Slow Shutter)
• GAIN : To get brighter picture.
G. SYNC
• INTERNAL : Internal synchronization
• LINE LOCK : Phase adjustment may be necessary in multiple camera
installations to prevent picture roll when switching between cameras
H. RS485
• CAMERA # : Selectable from 1 to 255
(Note : Pelco D is the default)
I. DAY/NIGHT
• AUTO : For automatic switchover from day mode to night
( Note : This setting is dependent on the AGC setting.)
• B/W : To keep a B/W image at all times
• COLOR : To keep a color image at all times
• CDS : external input signal control
J. EXIT MENU
• EXIT NO CHANGES : No change
• SAVE NEW AND EXIT : Save change
• RESTORE FACTORY SETTINGS : Factory default
• SW REV
K. PREVIOUS PAGE
• PREVIOUS PAGE : Return page
To Next Page
Loading...
Need help?
General