10
English
• During work, you must tightly hold the power tool
and ensure you stand rmly. You should hold the pow-
er tool with your hands�
• When operating and using the power tool, you can
only hold switch position of the main handle rather than
other parts�
• Avoid stopping an power tool motor when loaded�
• Never remove any chips or fragments with your
power tool's motor running�
• Use accessories without defects - it will make work-
ing with the power tool easier�
• The modication of the drill bits design and the use
of removable orices and accessories not envisaged
for this power tool is strictly forbidden�
• Do not apply excessive pressure when operating the
power tool - it can jam the drill bit and overload the
engine�
• Do not allow drill bits to jam in the material pro-
cessed� If this occurs, do not try to release them by
means of the power tool engine� This can put the pow-
er tool out of order�
• Striking out drill bits jammed in the material pro-
cessed with a hammer or other objects is strictly for-
bidden - metal fragments can hurt both the operator
and the people nearby�
• Avoid overheating your power tool, when using it for
a long time�
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol Meaning
Cordless drill /
screwdriver
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
ABS ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear a dust mask�
Symbol Meaning
Do not heat the battery
above 45°C� Protect from
prolonged exposure to direct
sunlight�
Do not dispose of the battery
in a domestic waste con-
tainer�
Do not dispose of the battery
in the re.
Protect the battery from the
rain�
min
Battery charging time�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Wear protective gloves�
Torque control position:
"Drilling"�
Stepless speed control�
To Next Page
Loading...
