DWT DS-150 KS - Page 6

6
English
Noise
information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of
conformity
We declare under our sole responsibility that the
product described under "Power tool specications" is
in conformity with all relevant provisions of the
directives 2006/42/EC including their amendments
and complies with the following standards: EN 61029-1,
EN 61029-2-4.
Managing director V.Kobzar
Merit Link International AG
Switzerland
Stabio, 25.09.2015
General
safety recommendations
CAUTION! Make sure you have read
and understood all recommendations.
Failure to observe the following recom-
mendations may result in electric shock,
cause re and / or serious injuries. The term
"power tool", used in this manual refers to the
tools equipped with a power supply cord or a
battery.
Working space
• The workstation should be kept tidy and well-lit.
Disorder at the workstation and inadequate lighting
may result in accidents.
• Do not use power tools in environment exposed
to the risk of explosion, e.g. near ammable liquid
vapours, gases or ammable particles in the form of
dusts. During operation, sparks are generated, which
may ignite dust or vapours.
• Do not allow children and unauthorised persons
near places where operations with the use of an
electric tool are carried out. Third parties may distract
the operator's attention, and he may loose control over
the tool.
Power tool specication
Double grinder DS-150 KS DS-200 KS DS-250 GS DS-350 GS
Power tool code
[127 V ~50/60 Hz]
[230 V ~50/60 Hz]
742296
743453
742302
743460
742319
743477
742326
743484
Rated power [W] 150 200 250 350
Power output [W] 83 110 138 193
Amperage at voltage
127 V [Amps]
230 V [Amps]
1.18
0.65
1.57
0.87
1.97
1.09
2.76
1.53
No-load speed [RPM] 2950 2950 2950 2950
Ø of grinding disc
[mm]
[inches]
125 / 125
5" / 5"
150 / 150
6" / 6"
150 / 150
6" / 6"
200 / 200
8" / 8"
Bore Ø of grinding disc
[mm]
[inches]
12,7 / 12,7
1/2" / 1/2"
12,7 / 12,7
1/2" / 1/2"
12,7 / 32
1/2" / 1-17/64"
16 / 16
1/2" / 1/2"
Thickness of grinding disc
[mm]
[inches]
16 / 16
5/8" / 5/8"
20 / 20
25/32" / 25/32"
20 / 40
25/32" / 1-37/64"
20 / 20
25/32" / 25/32"
Spindle thread
M12
1/2"-9
M12
1/2"-9
M12
1/2"-9
M12
1/2"-9
Weight
[kg]
[lbs]
5,2
11.46
8,4
18.52
8,9
19.62
13,3
29.32
Safety class
I I I I
Sound pressure [dB(A)] 59,1 60,1 59 62,6
Acoustic power [dB(A)] 72,1 73,1 72 75,6
Weighted vibration [m/s
2
] — — — —