10
English
Recommendations
on the power tool operation
Select the type and grain structure of
grinding disc 3 depending on the
machined material and the roughness of
the surface that you are expecting to
achieve.
• Put the power tool on the work table, it is desirable
to x it with the use of bolts or clamps.
• Lower protective glass 1 as down as possible to
grinding disc 3.
• Start the power tool, wait until grinding disc 3 has
reached its maximum rotation speed and smoothly
move the workpiece placed on supporting plate 5 to
grinding disc 3.
• Do not apply excessive pressure to the workpiece,
as it will not bring better results but it will overload the
engine and wear, the workpiece will be heated and
grinding disc 3 will be worn out more quickly.
• Move the workpiece to the left / the right a little bit. It
will ensure even wear of grinding disc 3.
• It is recommended to place the workpiece in the
water from time to time in order to avoid its overheating
during treatment.
Power tool maintenance /
preventive measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean.
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts. Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.dwt-pt.com.
•
Transportation
of the power tools
Categorically not to drop any mechanical impact on
the packaging during transport.
• When unloading / loading is not allowed to use
any kind of technology that works on the principle of
clamping packaging.
Environmental
protection
Recycle raw materials instead of
disposing as waste.
Power tool, accessories and packaging should be
sorted for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The manufacturer reserves the possibility to introduce changes.The manufacturer reserves the possibility to introduce changes.
To Next Page
Loading...