DWT EX03-125 D - Page 7

7
English
Noise
information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of
conformity
We declare under our sole responsibility that the
product described under "Power tool specications" is
in conformity with all relevant provisions of the
directives 2006/42/EC including their amendments
and complies with the following standards: EN 60745-1,
EN 60745-2-4.
Managing director V.Kobzar
Merit Link International AG
Switzerland
Stabio, 30.09.2015
General
safety recommendations
CAUTION! Make sure you have read
and understood all recommendations.
Failure to observe the following recom-
mendations may result in electric shock,
cause re and / or serious injuries. The term
"power tool", used in this manual refers to the
tools equipped with a power supply cord or a
battery.
Working space
• The workstation should be kept tidy and well-lit.
Disorder at the workstation and inadequate lighting
may result in accidents.
• Do not use power tools in environment exposed
to the risk of explosion, e.g. near ammable liquid
vapours, gases or ammable particles in the form of
dusts. During operation, sparks are generated, which
may ignite dust or vapours.
• Do not allow children and unauthorised persons
near places where operations with the use of an
electric tool are carried out. Third parties may distract
the operator's attention, and he may loose control over
the tool.
Electric safety recommendations
• The tool plug should always be inserted to an
appropriate socket. This reduces the risk of electric
shock. Do not use plug adapters with grounding
contacts.
• Avoid touching grounded items, such as metal pipes,
heaters, cookers and refrigerators. If the worker's body
comes into contact with a grounded item, the danger of
electric shock increases.
Power tool specications
Rotary sander EX03-125 D EX03-125 DV EX03-150 D
Power tool code
[127 V ~50/60 Hz]
[230 V ~50/60 Hz]
742562
743729
742579
743736
742586
743743
Rated power [W] 300 380 300
Power output [W] 140 200 140
Amperage at voltage
127 V [Amps]
230 V [Amps]
2.5
1.4
3
1.6
2.5
1.4
No-load speed [RPM] 12000 6000-13000 12000
No-load oscillation rate [OPM] 24000 12000-26000 24000
Eccentricity
[mm]
[inches]
2
5/64"
1
3/64"
2
5/64"
Sanding plate Ø
[mm]
[inches]
125
5"
125
5"
150
6"
Weight
[kg]
[lbs]
1,75
3.86
1,8
3.97
1,77
3.9
Safety class
Sound pressure [dB(A)] 79 91,4 79
Acoustic power [dB(A)] 92 80,4 92
Weighted vibration [m/s
2
] 8,5 3,06 8,5