Dwyer Instruments Digihelic DHC Series - Page 12

Multi-State Value - Voltage Output Range
This object represents the nominal range of the voltage output channel.
Binary Value - Enable Set Point 1
This object represents the enable state of set point 1. When enabled, the set point 1
trigger and reset values are compared against the current process value.
Analog Value - Set Point 1 Trigger Value
This object represents the process value at which set point 1 transitions from inactive
to active. The unit of this value matches the unit of the selected process mode.
Analog Value - Set Point 1 Reset Value
This object represents the process value at which set point 1 transitions from active to
inactive. The unit of this value matches the unit of the selected process mode.
Binary Value - Set Point 1 Status
This object represents the current status of set point 1. When active, the SP1 LED on
the instrument face is illuminated.
Binary Value - Enable Set Point 2
This object represents the enable state of set point 2. When enabled, the set point 2
trigger and reset values are compared against the current process value.
Analog Value - Set Point 2 Trigger Value
This object represents the process value at which set point 2 transitions from inactive
to active. The unit of this value matches the unit of the selected process mode.
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
Number of States
State Text
MSV2
“Voltage Output Range”
Multi-State Value
1
{0,0,0,0}
Normal
No Fault Detected
FALSE
4
{“0-10V”, “0-5V”,
“2-10V”, “1-5”}
BACnet Object Identier
Character String
BACnet Object Type
Unsigned
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
Unsigned
BACnet Array[N] of
Character String
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Read
Read
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
BV1
“Enable Set Point 1”
Binary Value
Active
{0,0,0,0}
Normal
No Fault Detected
FALSE
BACnet Object Identier
Character String
BACnet Object Type
BACnet Binary PV
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
Units
Max Pres Value
Min Pres Value
AV9
“Set Point 1 Trigger Value”
Analog Value
Model Specic
{0,0,0,0}
Normal
No Fault Detected
FALSE
Mode Specic
Model Specic
Model Specic
BACnet Object Identier
Character String
BACnet Object Type
Real
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
BACnet Engineering
Units
Real
Real
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Read
Read
Read
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
Units
Max Pres Value
Min Pres Value
AV10
“Set Point 1 Reset Value”
Analog Value
Model Specic
{0,0,0,0}
Normal
No Fault Detected
FALSE
Mode Specic
Model Specic
Model Specic
BACnet Object Identier
Character String
BACnet Object Type
Real
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
BACnet Engineering Units
Real
Real
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Read
Read
Read
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
BV2
“Set Point 1 Status”
Binary Value
Inactive
{0,0,0,0}
Normal
No Fault Detected
FALSE
BACnet Object Identier
Character String
BACnet Object Type
BACnet Binary PV
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
Read
Read
Read
Read
Read
Read
Read
Read/Write
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
BV3
“Enable Set Point 2”
Binary Value
Active
{0,0,0,0}
Normal
No Fault Detected
FALSE
BACnet Object Identier
Character String
BACnet Object Type
BACnet Binary PV
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Property Default Value Property Data Type Access
Object Identier
Object Name
Object Type
Preset Value
Status Flags
Event State
Reliability
Out Of Service
Units
Max Pres Value
Min Pres Value
AV11
“Set Point 2 Trigger
Value”
Analog Value
Model Specic
{0,0,0,0}
Normal
No Fault Detected
FALSE
Mode Specic
Model Specic
Model Specic
BACnet Object Identier
Character String
BACnet Object Type
Real
BACnet Status Flags
BACnet Event State
BACnet Reliability
Boolean
BACnet Engineering Units
Real
Real
Read
Read
Read
Read/Write
Read
Read
Read
Read/Write
Read
Read
Read
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30