EasyManua.ls Logo

Dwyer Instruments IP Series User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
546-622-053 Dwyer Instruments Series I/P Current to Pressure Transducer Page 1
Dwyer Instruments, Inc.
Michigan City, IND. 46361
Phone (219) 879-8868
Fax (219) 872-9057
The Series IP
I/P Current to Pressure
Transducer
Installation,
Operation and
Maintenance
Instructions
Contents
Section Description Page
1.0 Description & Installation 2
2.0 Operation 3
3.0 Maintenance 5
4.0 Troubleshooting 5
Pilot Pressure
Atmospheric Pressure
Supply Pressure
Output Pressure
Question and Answer IconNeed help?

Do you have a question about the Dwyer Instruments IP Series and is the answer not in the manual?

Dwyer Instruments IP Series Specifications

General IconGeneral
BrandDwyer Instruments
ModelIP Series
CategoryTransducer
LanguageEnglish

Summary

Specifications

Description and Installation

Description

Explains the Series IP I/P Transducer's function as a current/voltage to pneumatic output converter.

Principle of Operation

Details the force balance mechanism using a coil, magnet, flexure, and booster relay.

Mounting

Covers mounting options (pipe, panel, bracket) and vibration considerations for optimal performance.

Pneumatic Connections

Covers 1/4 NPT supply and output ports, air quality, and optional gage ports.

Electrical Connections

Explains connecting electrical input signals to specific leads for forward or reverse acting.

Operation

Calibration

Provides a step-by-step guide for zero and span adjustments to achieve accurate output pressure.

Dimensional Drawings

Presents detailed measurements and port locations for the transducer unit.

Intrinsically Safe Operation

Details Factory Mutual intrinsic safety approval and associated installation requirements.

Maintenance

Troubleshooting