Need help?Do you have a question about the DX Patrol QO-100 and is the answer not in the manual?
Describes the front panel layout including the display, buttons, and indicators.
Details the connectors and ports located on the rear of the ground station unit.
Lists the necessary hardware and cables required for connecting the ground station.
Provides step-by-step instructions for connecting the ground station to LNB, GPS, and antenna.
Describes the process of turning on the ground station and the initial screen display.
Explains how to navigate through the ground station's menu system using the menu button.
Displays satellite signal strength in dBm, useful for dish pointing and LNB adjustment.
Shows input DC voltage, PA temperature, LO and GPS lock status for system monitoring.
Displays geographic coordinates, date, time, number of satellites, and QTH locator.
Shows current firmware version and serial number of the ground station unit.
Details the conditions for readiness, including lock indications and preparation for transmission.
Explains the process of transmitting, VOX activation, power indication, and SWR alarms.
Describes setting the TX gain level (P38) and RX gain level (R13) for optimal performance.
Provides internal views of the power amplifier and labels key adjustment points on the PCB.
Details the specific LNB unit included with the ground station for QO-100 operation.
Describes the included GPS and Glonass antenna for location and timing services.
Presents the optional Helix antenna for QO-100, including its quick mount system.
General| Brand | DX Patrol |
|---|---|
| Model | QO-100 |
| Category | Marine Radar |
| Language | English |
To Next Page