ACCU-CAL™ 160 Radiometer User Guide
Figure 11. Start Up Screen
Power Supply
The power supply for charging of the built-in lithium polymer battery is connected via the USB
interface. Plugging in a USB cable for charging of the battery is only permitted for
temperatures above 0°C (32°F). For charging the battery, a computer or, as an alternative, a
standard USB power supply (rated voltage: 5VDC) can be used. Please use the provided USB
cable or a high-quality replacement with a sufficient cross-section of the wires otherwise
charging might be impaired due to too high voltage drops along the cable length.
Reinitialize/Change
Device Button
Serial Number &
Type (UVA or LED)
Data Import/
Export Buttons
To Next Page
Loading...