ACCU-CAL™ 160 Radiometer User Guide
To navigate through the setup menu, press the left button to move the highlighted selection
up and the middle button to move the highlighted selection down. The right button is used to
select the highlighted menu item.
Figure 4. Setup Menu
In the setup menu, you can also start a reference measurement and display the device info;
i.e., wavelength band, serial number, firmware version, date/time, next calibration date,
internal temperature.
All settings are automatically saved to the device and are readily available upon device startup.
To exit setup, move the arrow to the bottom-most item and press the right button.
To Next Page
Loading...