EasyManua.ls Logo

dymax PC-3 - SPECIFICATIONS

dymax PC-3
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TM-021 PN 35933
Rev 05/06/97
7
SPECIFICATIONS
PC-3
SPECIFICATIONS
Voltage* 120 Vac, 60 Hz
Current 2.5 Amp Max.
Fuse 3 Amp 5 x 20 mm
Lamp/Reflector 50 Watt (pre-focused)
Shutter Timer 1 to 50 sec. delay
Foot Switch Rocker type
Hour-Meter 99,999.9 hours, non-resetable
* 100, 220 Vac and 50, 60 Hz Power Supplies are available.
Output Intensities (Typical)**
WAVELENGTH FILTERED UNFILTERED
320-390 nm 1.5+ 2.5+
** Measured with an EIT Spotcure Radiometer. Values in W/cm
2
.
CAUTION
With the filter installed, the PC-3 lamp emits only UV-A and UV-B light and a low amount of UV-
C light. Without the filter, UV-A, UV-B, and UV-C, and visible light are emitted. Never look
directly at the light source while the unit is in use.