Using SRD with DSSS (Direct
Sequence Spread Spectrum) and
other than FHSS wideband
modulation.
1. Maximum EIRP density is 2mW/
MHz. Maximum100mW (20dBm)
EIRP is permitted to use.
2. Maximum EIRP density is 20mW/
MHz. Maximum 100mW (20dBm)
EIRP is permitted to use with the
following condition:
It is permitted to use SRD for
outdoor applications only for
purposes of gathering telemetry
information for automated
monitoring and resources
accounting systems or security
systems.
3. Maximum EIRP density is 10mW/
MHz. Maximum 100mW (20dBm)
EIRP.
Indoor applications is permitted
to use.
Ukraine: Limited
implementation
EIRP =100mW (20dBm) with built-in
antenna’s maximum gain is 6dBi.
User's Manual 7-9
To Next Page
Loading...
