2. Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
Figure 4-11 Connecting the LAN cable
1. LAN jack 2. LAN cable
Product appearance depends on the model you purchased.
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
To disconnect the LAN cable, gently grasp the LAN cable while pressing
the latch, and then slowly lift it up to remove it.
USB Type-C™ Adapters
Your computer capabilities can be enhanced by connecting external
devices such as RGB monitor to the Thunderbolt™ 4/USB Type-C™ port
via USB Type-C™ adapters.
Depending on the model you purchased, one of the following USB Type-
C™ adapters might be provided.
Always use the USB Type-C™ adapter that is included with your
computer or Dynabook accessories.
When connecting the USB Type-C™ adapter, Thunderbolt function is
not supported.
Do not connect other USB Type-C™ adapter to USB Type-C™ port of
USB Type-C™ adapter.
User's Manual 4-24
To Next Page
Loading...
