Dynabrade Grinder Series - Step 10: Install Governor Assembly

10. Carefully, fasten pinion gear in vise (bronze or aluminum jaws).
• Apply a small amount of Loctite #243 to threads of governor.
• Use a slot-blade torque-driver to install governor assembly.
• Left Hand Thread. Turn counterclockwise. Torque to: 1.4 N•m/~12 lbs. in.
Motor assembly completed.
Left Hand Thread. Turn counterclockwise. Torque to: 1.4 N•m/~12 lbs. in.
54998 Governor Assembly
#243 Loctite