EasyManuals Logo

Dynacord AXM 12A Datasheet

Dynacord AXM 12A
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Engineering Data Sheet
AXM 12A
Powered 12-inch coax monitor speaker
Max. SPL 128 dB
DSP controlled power amplifier (360 + 160 W IHF-A)
LCD display for easy configuration
Small and lightweight housing (14,9 kg)
This monitor cabinet combines a very compact
footprint with high acoustical output (SPL
max
= 128 dB)
due to its 12”/1,75” coaxial transducer, the onboard
DSP and the internal power amplifiers with a total of
520 W / IHF-A maximum dynamic power capability. The
integrated mixing section provides 3 input channels:
Mic/Line 1 and 2 with a combi XLR / Jack socket and a
stereo input featuring RCA type connectors. The DSP
offers 5 factory presets (IIR for monitor operation, FIR
for full-range operation) and user settings memories,
Hi and Lo shelving and parametric midrange EQs,
adjustable Low-Cut and tunable feedback notch filter.
Easy operation via the backlit LC-Display and a single
Push-Encoder. XLR outputs for direct or mix out.
The enclosure is made from 15 mm birch plywood with
a heavy duty structured lacquer surface and a solid
steel front grill. At 33°, the monitor angle is optimized
for small stages and the minimized footprint allows for
perfect proximity to the artist. A handle and two
recessed grips help for convenient transport and
placement.
An integrated pole mount at the front allowing for
additional applications such as small main PA or fill,
delay cabinet (onboard delay line for up to 100 m
distances in 0.1 m increments) or the configuration of
an extremely compact active-3-way system in
combination with a powered sub.
Parts included
Quantity Component
1 AXM 12A
1 Power cord
1 User manual
1 Important safety instructions
Technical specifications
Description Powered monitor speaker for
multifunctional applications
Maximum amplifier output
capability, IHF-A
520 W
Low amplifier power 360 W IHF-A, 260 W RMS
Mid-high amplifier power 160 W IHF-A, 75 W RMS
Maximum SPL (1 meter) 128 dB (calc.)
Frequency range (-10 dB) 50–20000 Hz
Coverage angle nominal 90° horizontal x 90° vertical
Crossover frequency 1.6 kHz

Other manuals for Dynacord AXM 12A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynacord AXM 12A and is the answer not in the manual?

Dynacord AXM 12A Specifications

General IconGeneral
XLR out2
AC (power) inYes
Audio (L/R) in1
Frequency range50 - 20000 Hz
Product colorBlack
Rack mountingNo
Volume controlRotary
Housing materialPlywood
RMS rated power520 W
Woofer diameter (imperial)12 \
Tweeter diameter (imperial)1.75 \
Display typeLCD
Operating temperature (T-T)0 - 40 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth484 mm
Width414 mm
Height339 mm
Weight14900 g
Package weight18400 g

Related product manuals