EasyManuals Logo

Dynacord DSP 260 - SOFTWARE V1.4.0 User Manual

Dynacord DSP 260 - SOFTWARE V1.4.0
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background image
DYNACORD DSP 260
DSP 260 Software V1.4.0
Welcome to software version 1.4.0 for the DSP 260 editor software and firmware. This document contains important
information and updates regarding the installation and use of V1.4.0 software.
1 Important Information for Updating Hardware
CAUTION: For existing users of DSP 260 hardware and software please back up and store any existing settings or
User Presets to your PC. During the process of updating the firmware in the unit to V1.4.0, all existing
User Presets and settings are erased. After the update, the stored settings may be transferred to, and
stored in, the hardware.
To back up settings to your PC, do the following:
1. Connect the DSP 260 hardware to the PC
2. Launch the DSP 260 Editor Software
3. When asked in which direction to sync the information, read the data into the PC.
4. Click File > Save As and select a location on your hard disc to save the files to.
5. Recall any User Presets as needed and repeat the process.
After storing your data, you may proceed with the software and firmware update.
2 Minimum System Requirements
The following are the System Requirements for installing and running the DSP 260 Editor Software.
HINT: *PC refers to Personal Computers running the specified Windows Operating Systems. Intel-based Apple
computers are only supported when running the specified Windows OS natively under Boot Camp. Virtual-
ization, such as that offered by VMware or Parallels, is not officially supported.
3 What's New in V1.4.0
The following is a list of new features or enhancements that can be found in DSP 260 Editor V1.4.0
4 Installing V1.4.0 Software and Firmware
DOWNLOAD THE SOFTWARE
Go to the Dynacord web site to download the software: http://www.dynacord.com/en/downloads
PC* with Pentium IV 1.2 GHz or equivalent processor (1.6 GHz or better is recommended)
Microsoft Windows XP Service Pack 2 or Vista (32-bit Only)
Microsoft .Net 2.0 Framework
•256 MB RAM
Hard disk with 250 MB of storage available
VGA Monitor (1024x768)
Graphics card, High Color (16-bit)
•Mouse
Keyboard
•One USB port
Parameter download time from the Editor to the device is reduced
Front panel lock will lock all the setup menu screens except the lock screen
Fixed minor display bugs

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynacord DSP 260 - SOFTWARE V1.4.0 and is the answer not in the manual?

Dynacord DSP 260 - SOFTWARE V1.4.0 Specifications

General IconGeneral
BrandDynacord
ModelDSP 260 - SOFTWARE V1.4.0
CategorySoftware
LanguageEnglish