Need help?Do you have a question about the Dynacord VRS 23 and is the answer not in the manual?
Covers input level, universal input jack, volume, power switch, pilot lamp, and effect display.
Details delay time buttons, reverb-echo selector, and delay/regeneration controls.
Covers modulation depth, frequency, tone, and return controls.
Details universal output, foot switch jack, and specific input/output jacks.
Illustrates series connection of the unit to amplifiers.
Shows how to connect the unit to Dynacord amplifiers.
Illustrates connection for stereo effect operation.
Shows how to connect the unit to external mixers.
Demonstrates settings for achieving an echo sound effect.
Demonstrates settings for achieving a reverb sound effect.
Demonstrates settings for achieving a voice doubling effect.
Demonstrates settings for achieving reverb with chorus sound.
Details input and effect jacks on the front panel.
Details input, output, and effect jacks on the rear panel.
Covers delay time, sampling rate, frequency response, and distortion.
Details dynamic range, power supply, dimensions, and weight.
Covers input level, universal input jack, volume, power switch, pilot lamp, and effect display.
Details delay time buttons, reverb-echo selector, and delay/regeneration controls.
Covers modulation depth, frequency, tone, and return controls.
Details universal output, foot switch jack, and specific input/output jacks.
Illustrates series connection of the unit to amplifiers.
Shows how to connect the unit to Dynacord amplifiers.
Illustrates connection for stereo effect operation.
Shows how to connect the unit to external mixers.
Demonstrates settings for achieving an echo sound effect.
Demonstrates settings for achieving a reverb sound effect.
Demonstrates settings for achieving a voice doubling effect.
Demonstrates settings for achieving reverb with chorus sound.
Details input and effect jacks on the front panel.
Details input, output, and effect jacks on the rear panel.
Covers delay time, sampling rate, frequency response, and distortion.
Details dynamic range, power supply, dimensions, and weight.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Inputs | 2 x XLR, 2 x 1/4" TS |
| Outputs | 2 x XLR, 2 x 1/4" TS |
| Weight | 3.5 kg |
| Type | Digital Reverberation System |
| Channels | Stereo |
To Next Page
