12
MAINTENANCE
Before every ride, check your scooter and it’s components against the
following checklist. In addition, if you have an accident, even a minor one,
always inspect the scooter thoroughly before riding the scooter again.
• Check that wheels are straight.
• Check attachment of both bolt on wheels.
• Check handlebar and stem for signs of stress or fatigue.
• Inspect your tires for wear or damage.
• Check the attachment of the handlebar.
• Check the wheels to see if they can spin smoothly.
• Check the product before each ride to determine if any potentially hazardous
parts or conditions have developed.
• Replace worn or broken parts immediately.
• Handlebar hand grip or tube end plugs should be replaced if damaged as
bare tubes have been known to cause injury. All products with capped
handlebar ends should be checked regularly to ensure that adequate
protection for the ends of the handlebars are in place.
• Replacement forks must have the same rake and tube inner diameter as the
original product.
• Not suitable for children under 3 years as pieces may break off and cause a
choking hazard.
• Ensure any accessories supplied are secure to the product and do not
interfere with operation of the unit.
• Replace worn handlebar grips.
WARNING:
A scooter that does not work properly can cause you to lose control and fall.
Inspect the entire scooter thoroughly before every ride, and do not ride it until
any problem has been corrected.
• Periodically inspect the scooter for wear or damage.
• To clean the scooter, use a mild soap and water solution and clean cloth.
Rinse clean with water to remove soap residue.
To Next Page
Loading...
Need help?
General
