11
Check to assure the seat stay firmly after Note:
9. Seat Assembly
. Make sure the lock knob on the seat is unlocked as
shown.
. Insert the tabs on the seat back into slots in the vehicle
body.
. Press the seat (together with the knob) all the way
down, and use a coin or slotted screwdriver to lock the
knob on the seat.
assembly.
8. Motorhood Assembly
. Take out the motorhood from polybag.
. Install the motorhood in the proper position as shown,
by fitting the tabs on the motorhood into slots on the
vehicle body.
step.
move forward or backward before proceeding to next
Open ON/OFF button to check if the vehicle can Note:
11. Connect Audio Input Cable
. Plug the audio input cable on AUX line-in jack on the vehicle. (You can connect the cable with
an audio device or MP3 player whenever you want to play.)
Note:
For long term use, please remember to store the audio input cable in a safe place when
not in use.
10. View Mirrors Assembly
. Insert the view mirror into the hole in front of the
. Repeat for the other side.
vehicle body and push until you hear it click into
place.
To Next Page
Loading...
Need help?
General
